Factory Rood Rack Adapter For The Surco Safari Roof Cargo Basket

Question

Question:

Will these u-bolts work with a Surco Safari 84r rack mounted on a 2015 Suburban with OEM cross bars? Thanks!

asked by: Carolina J

0

Expert Reply:

It's always best to use adapters made for the Surco Safari Rack # S5072 so it's secure. That being said the U bolts you're looking at # CTC-18PARTS isn't the best option. You need these rails # SPR3600 for your factory roof rack.

expert reply by: Adam E

0

Answer 1

If you're installing the Surco Safari Rack 5.0 Rooftop Cargo Basket #S5050 and Adapter Ki #SPCH100 on your 2018 Ford F-150 then you also need the 36" Roof Rails #SPR3600. These install onto the roof of your F-150 and then the adapter rails…

view full answer...

Answer 2

Yes, the Adapter for Surco Safari Roof Racks #SPCH100 will mount to your factory rails allowing you to mount your Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails #SPS5060-1101 to your 2008 Hummer H3.

view full answer...

Answer 3

Hey Daniel, The Adapter for Surco Safari Roof Racks #SPCH100 would require rails in order to install. The base of the adapters has two holes which will each get a bolt and square nut that would sit inside of a track in the rails. You can add rails to…

view full answer...

Answer 4

Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks #THTP42 and Yakima Tracks #Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers #Y53TR with these…

view full answer...

Answer 5

I spoke with my contact at Yakima and she informed me that this Yakima MegaWarrior Extra Large Roof Rack Cargo Basket with Extension #Y07080-82 has internal dimensions of 68 inches in length and 47 in width. I attached installation instructions for…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Factory Rood Rack Adapter For The Surco Safari Roof Cargo Basket

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching