bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 529994
Q & A Icon

Overall Dimensions of Replacement Threaded Receiver Insert for Swagman Bike Racks  

Updated 04/19/2021 | Published 04/13/2021

Question:

Im needing something smaller than P313 which I bought and just slightly larger than P333. If P334 is 13/16inch square length doesnt matter then it should work in my bike rack hitch.

0

Expert Reply:

The Replacement Threaded Receiver Insert for Swagman XTC2 Platform Bike Rack # P334 is 3/4" square and 7/8" including the grommet on the end. It sounds like it would be close for what you're looking for.

expert reply by:
0
Erik B
square dimensions
square dimensions
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Accessories and Parts

Videos

Help Articles

Expert Answers

Others Also Watched
In-Depth Review of the B and W Anti-Rattle Clamp for 2-1/2" Hitch Receivers
A Closer Look at the Blue Ox Hitch Extender for Tow Bars
Let’s Check Out the Roadmaster Anti-Rattle Hitch Extender for Tow Bars
Detailed Breakdown of the Roadmaster Quiet Hitch for 2" Trailer Hitches
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
Choosing the Right Anti-Rattle Hitch Device
An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
Breaking Down the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
A Closer Look at the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Choose the Right Trailer Hitch Class
5 Things to Know About Weight Distribution Hitches
The 5 Best Trailer Drop Hitches You Can Buy
30-Amp and 50-Amp RV Service: What's the Difference?
Is It Illegal to Leave My Hitch on My Truck?
What are the Common Types of Propane Fittings Used on RVs?
Best Bike Racks for Electric Bikes
How to Mount a Truck Bed Camper
Others Also Asked
What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...
What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...
How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...
Installing the Replacement Hitch Hardware for the Yakima SwingDaddy Bike Rack

It looks like you purchased the Replacement Mounting Hardware, #Y8890185. This should have come with the square, black shank insert, a square nut that fits inside of the shank insert, a flat washer, a lock washer and a threaded pin and clip. I made a…

view full answer...
Size of Replacement Threaded Hitch Bolt

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

view full answer...
What Is the Thread Pitch for Hitch Pin on Swagman XCT Bike Rack

I do have an option for you but bike rack manufacturers don't publish their hitch pin thread specs to discourage from using a different hitch pin from another manufacturer so this I cannot provide. That said, I can confirm the Locking…

view full answer...
How to Remove Threaded Hitch Pin S64029 From Swagman Bike Carrier

The hitch lock, part #S64029 that you came from for your Swagman Bike carrier should be pretty easy to remove. I have attached a photo of the lock and as the arrow indicates the hitch bolt has a threaded end. After you remove the lock end of the pin…

view full answer...
Replacement Hitch Threaded Insert for Swagman Chinook Bike Rack

For the Swagman Chinook the correct replacement hitch insert is the part #P313. The one you referenced fits other racks.

view full answer...
Overall Length of Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack

Hey Ak, thanks for reaching out! The Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR has a 4-5/8" overall length. I've attached a photo of this for your reference. Are you needing to replace the hitch pin…

view full answer...
What Replacement Hitch Bolt and Threaded Bolt Insert Fits My Yakima SwingBase #Y34VR?

Yes! We do have those parts for your Yakima SwingBase #Y34VR. The replacement parts you need the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR (Yakima part 8880953) and the Replacement Hitch Bolt Threaded Insert…

view full answer...