Do the etrailer Horizontal E-Tracks Come With Backing Plates

Question

Question:

Does this kit come with the back plate described in the video?

asked by: Adam S

0

Expert Reply:

The etrailer Horizontal E-Tracks like part # e45VR do not come with a backing plate but you can purchase this separately using the E-Track Backing Plate part # e89RR.

expert reply by: Conner L

0

Answer 1

Hello Todd, Yes, they are basically the same. I went out to the warehouse to make sure the slots are the same, they measure 1/2" in the most narrow part, 1" in the widest part, and they are 2 1/2" long. The only "real"…

view full answer...

Answer 2

I do have an option for you, but there is not an E-Track that is one piece and is 20' long. Instead I recommend using four of the 5' long etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs #e45VR. This will give you the 20'…

view full answer...

Answer 3

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

view full answer...

Answer 4

Hey Darryl, thanks for reaching out. That's probably because we don't have a video that shows that. We do mostly trailer/RV work, and we don't see many box trucks here at our shop. I can still provide some general instructions for you…

view full answer...

Answer 5

You can certainly still use the black powder coated E-Track on a trailer with an aluminum deck. You will want to put a layer between the E-Track and the aluminum of your trailer, to help prevent corrosion from contact of dissimilar metals. This layer…

view full answer...

Answer 6

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 7

etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.

view full answer...

Answer 8

We do recommend backing plates for all e-track installations. They will provide additional support. You will need a set of four backing plates, part #e66RR, for an 8' section of E-Track. I have included a product description link, a weblink on…

view full answer...

Answer 9

E-track can be driven over and it will be fine. It would not collapse or otherwise damage itself. You could use and drive over the Erickson Horizontal E-Track #EM19147. Then for a wheel strap the Erickson E-Track Wheel Tie-Down Strap with Roller…

view full answer...

Do the etrailer Horizontal E-Tracks Come With Backing Plates

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching