Trailer Hitch that Fits 2019 Mazda CX-3 Hatchback

Question

Question:

Is there a trailer hitch that fits a 2019 Mazda CX-3 Hatchback? Thanks

asked by: Ronald R

0

Expert Reply:

Yes the Curt hitch part # C11418 that you referenced is a fit for a 2019 Mazda CX-3 hatchback like have as it fits all models. We had the chance to install it on a 2019 hatch as well which you can see in the attached install video.

expert reply by: Jameson C

0

Answer 1

So I'm guessing you got enough of the lock core drilled out to unlock it, is that correct? If so, you might be able to use the change key like #853-1251 to remove the core and replace it with a lock (and key) keyed to the remaining lock if…

view full answer...

Answer 2

I have not heard of anyone stacking two of cargo bag #988501 on top of a carrier such as #63153 but as long as they are properly secured to the carrier and you are within the capacity of the carrier it should work just fine. For this type of…

view full answer...

Answer 3

Between the two hitches that fit your 2018 Mazda CX-3 the Curt, part #C11418, is tucked under the rear bumper by about an inch more than the Draw-Tite, part #24933. Although I feel like the Curt is still more obvious to the eye because it has the…

view full answer...

Answer 4

The Curt Trailer Hitch, part #C11377 is designed to fit your 2015 Mazda 3 Hatchback. This is a Class l hitch and it has a 1-1/4 inch receiver opening. A note form Curt states that all non-trailer loads - bike racks, cargo carriers and so forth -…

view full answer...

Answer 5

The Curt #C55567, Tekonsha #118405 and the Hopkins #HM11141824 all serve the same function, and would all install in the same manner. The Hopkins and Curt models have a very slightly larger amp capacity for the stop/turn lamp signal at 3A per circuit…

view full answer...

Answer 6

Although both the Draw-Tite #24933 and the Curt #C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with the…

view full answer...

Answer 7

We have hitches that were specifically tested to fit the F-Sport models of the 2021 Lexus RX 350 like with the totally hidden Hidden Hitch part #DT58GR which has detachable lower hitch opening or the Draw Tite #75540 which only has the lower hitch…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Trailer Hitch that Fits 2019 Mazda CX-3 Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching