Replacement Axle To Replace Older Axle With 09074 and 14125A Bearing Combination

Updated 04/08/2021 | Published 04/06/2021

Question:

hello, I have two hadco hubs that I need to replace. outer bearing is a timken 09074, inner is a 14125a, and the inner seal is a national 5836. the spindle is 5 3/8 inches long, backing plate to outer edge. 4 3/4 inches dust seal lip to outer edge. Bolt pattern is 5x4.5 Do you happen to have a couple hubs that will fit this spindle? Thank you

asked by: Joseph G

Expert Reply:

I have an axle replacement option, but unfortunately we do not offer a hub that has the 09074 Outer bearing and 14125a inner bearing, and I was unable to find any hubs with this bearing combinations with other vendors.

Since the bearing combination is not common your best option is to replace the axle with one that uses standard bearings to make finding replacement parts now and in the future a much easier task.

Now to determine the correct replacement axle you will need a little bit of information from your current axle. You will need to know the axle rating, hub face to hub face measurement, and spring center to spring center measurement.

For example the Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # 35545I-EZ-89 has a 3500lb axle rating, a hub face to hub face measurement of 89", and a spring center to spring center measurement of 74" as shown in the included diagram. This option also includes idler hubs with the 5 on 4-1/2" bolt pattern you were looking for. If this matches the specifications of your axle this would be a great option.

If you have a different length or axle rating just let me know and I would be happy to go over the available options.

I included a video of the # 35545I-EZ-89 for you to take a look at.