bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Suspension Bolts
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Equalizer Suspension Bolt with Locknut - 5-1/4" Long
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Redline

Equalizer Suspension Bolt with Locknut - 5-1/4" Long

Part Number: 7-136-2-6-112
$50.14
Trailer Suspension Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
1" Diameter suspension bolt is used to suspend equalizer in tandem- or triple-axle applications. Locknut included. Great Prices for the best trailer suspension parts from Redline. Equalizer Suspension Bolt with Locknut - 5-1/4" Long part number 7-136-2-6-112 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (42)
  • Q & A (0)
  • Photos

Redline Trailer Suspension Parts - 7-136-2-6-112

  • Suspension Bolts
  • Camper
  • Car Hauler
  • Utility Trailer
  • 5-1/4 Inch Long
  • 1 Inch Diameter
  • Redline

1" Diameter suspension bolt is used to suspend equalizer in tandem- or triple-axle applications. Locknut included.


Features:

  • Suspension bolt attaches equalizer to center hanger
  • Included locknut secures in place


Specs:

  • Diameter: 1"
  • Threads per inch: 8
  • Length: 5-1/4"
  • Grade: 5


7-136-2 and 6-112 Equalizer Bolt and Locknut





Customer Satisfaction Score:

Ratings & Reviews

4.9

42 reviews
5 Stars
(38)
4 Stars
(3)
3 Stars
(1)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
The bolts worked fine but I’m now looking for equalizers that are 24.75” long 3” wide and have spring bolt holes on each end.
by:
Exactly what I needed to replace the old, worn out equalizer bolts.
by:
I have been trying to rebuild an old Big Tex trailer for the past month through local vendors. We needed springs, hardware, brakes, lights ect. We use this trailer for feeding cattle out on the range and the window was closing. Everytime I got a part from the local company it was wrong. Finally I found etrailer and everything was so simple to find myself and order. The service was outstanding and the delivery was a day ahead of schedule. I ordered all my suspension hardware and lights from them, it was quick and easy, quality looks great. Thank you
by:
Bolts I received were exactly what I needed to repair the equalizers on my goose neck trailer .
The fit was perfect. I will be ordering parts for my other trailers from ETRAILER
by:
Could not find this bolt locally, etrailer had the exact part and shipped it right out. Trailer is back on the road.
by:
Same pin as my factory one works great
by:
EXCELLENT description.,excellent setvice.Will definitely use them for future trailer parts
by:
This item was exactly what I needed thank you
the freight was very reasonable and was delivered on time
thank you
Leland trailer!!!!
by:
High quality. Shipped quick. product was as advertised.
by:
They’s plumb good!
by:
Yes
by:
by:
Exactly as described
by:
by:
by:
by:
by:
by:
by:
by:
by:
by:
by:
by:
25
42
true
Show More Reviews

See what our Experts say about this Redline Trailer Suspension Parts

  • Correct Center Bolts And Spring Eye Bolt To Go With 13-140-3 Equalizer
    Hello Cody, we have just the thing. For the 1" diameter center bolt you can use part # 7-136-2-6-112. The 3/4" leaf spring eye bolt is part # 7-135-2.
    view full answer...
  • Wet Suspension Bolts and Bushings for 7K Axles with Slipper Spring Leaf Springs
    It looks like the slipper springs for 7,000 pound axles are 2 inches wide which is good because that is a very common size for slipper springs so there will be options available. We have a 3-5/16 inch long wet bolt in a 9/16 inch, # 126B2, but I do urge you to first check to see if that 3-5/16 inch length will be long enough compared to your existing bolts. You may not need any new bushings but if you do then you would want to look at the inner and outer diameters of the bushings you...
    view full answer...
  • Installation Instructions for Equalizer for Slipper Springs
    You will want to use a 1" diameter wet center equalizer bolt like # 7-136-2-6-112 which inserts in the center hole and bolts to the hanger. I have attached a helpful article about the Slipper Spring Trailer Suspension System. The equalizer section is about halfway down the page.
    view full answer...
  • Replacement Leaf Spring Bolts and Bushings for Dexter 10K Axle On Big Tex Trailer
    The correct replacement leaf spring bushings for any given trailer will be dependent on the width and type of the leaf springs. The most common for a Dexter 10,000 lb Trailer Axle are 3" wide slipper springs. If you have 3" wide slipper springs then you can use part # 14-69. Then for eye bolts you can use part # 7-136-2-6-112 or part # 7-169-6-112 if you have 3" wide slipper springs. That said, it is always best to measure your leaf springs bushings and eye bolts in order to determine...
    view full answer...
  • Should Shackle Bolts Be Tightened Down So There Isn't Any Play
    It sounds like you have an equalizer bolt like part # 7-136-2-6-112 as opposed to one with a hex head like the part # 7-169-6-112. This is fine as long as the diameter and length matches what you're needing. When installing suspension bolts on your trailer we don't have any torque specs for them. You'll want to snug them up so the equalizer and shackles don't have side to side play and then back the nut off 1/4 turn so that there is some movement in the suspension but not too much. If...
    view full answer...
  • Recommended Hardware for Dexter Equalizer for 2-1/2" Wide Slipper Springs # 13-141-3
    To use with the Dexter Equalizer for 2-1/2" Wide Slipper Springs # 13-141-3 I recommend using the 1" diameter Suspension Bolt # 7-136-2-6-112 for the center/hanger bolt and the 3/4" diameter # 126A1 for the spring bolt. Both options are wet bolts with integrated grease zerks to allow for easy maintenance.
    view full answer...
  • Where To Measure Equalizers To Determine Correct Replacement For 2018 Kaufman Flatbed Trailer
    I would be happy to help you determine the correct replacement equalizer for your 2018 Kauffman flatbed trailer, but unfortunately we do not have a break down of the specific components your trailer uses. Instead you will need to measure your current equalizer center to center of the two horizontal mounting holes, and from the center of the upper hole to the center line of the two horizontal holes. For example the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16"...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Wilson B
Updated by:
Wilson B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924