Availability of 89" Long 3,500 lb Axle With 70" Spring Center Measurement
Updated 04/29/2026 | Published 04/26/2026
Products Featured in This Question
Question:
I am looking for a replacement boat axle - 89 hub face, 70 center mount, 5/4 lug pattern, 3500lb capacity. Can only find 89 hub face/ 74 mount axles on your site - do you carry anything other than what is listed? Thanks in advance!
asked by: Larry P
Expert Reply:
Hey Larry! All of our standard 3,500 lb axles with an 89" hub face measurement have a 74" spring center measurement like the # 35545I-EZ-89 you were looking at. The only solution is to cut off the spring seats and weld on new ones # TRSS238 to match your existing measurement. If that isn't something you want to do, I would check with Dexter to see if they can sell you an exact match.
What boat are you hauling?
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Q&A: Replacing Bent 3,500lb Axle In 2001 Nash 18FM Travel Trailer 6 Lug
- Q&A: Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
- Q&A: Can I Back Up With The DA75 Demco Brake Actuator DM33CV?
- Q&A: Looking for Bearing Kit for 3,500 lb Trailer Axle
- Q&A: Coupler Lock Recommendation For Dexter DX7 Coupler
- Q&A: Which Paint Or Rust-Preventative Coating Is Used On DA75 Demco DM28CV And DM33CV?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does The Demco DA75 Trailer Brake Actuator Have An Electric Lockout?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Hyk Outdoors Teardrop Campers: Happy Camping Without the Hassle
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements
Larry P.
4/29/2026
Hey, appreciate the reply! I have access to a welding shop who could relocate the mounts. I’m hauling a 20’ bowrider - Mercruiser 5.7 i/o - boat fits fine on the trailer but want a heavier axle as the existing one has a negative bow - inside tread of the tires wearing heavily. Not sure if the axle bow is a result of time/fatigue but would prefer a heavier axle if possible.