Suspension Enhancement Options For 2020 Nissan NV 2500

Question

Question:

I am needing support on my van that is carrying a lot of weight then I hook up to a trailer with a mini bobcat on it and Im pretty much staring at the sky

asked by: Andy M

0

Expert Reply:

Seems like you're needing some suspension enhancement! I recommend using the RoadActive kit # RAS3614-T. This will help your suspension from 0 to 100% travel. It's also adjustable to get the right amount of support. If that's not enough, get some helper springs # SSR-210-47 in the rear, these will only engage when your vehicle sags enough to hit the bump stops. If you're only looking to help the last half of your suspension travel and not hinder your smooth ride when you're not hauling, then the sumo springs alone will be what you want. You can use both the RoadActive and SumoSpring kit together!

The bump stops you're looking at # TNRNVHD are the same as the SumoSprings but are going to be a bit stiffer once engauged.

expert reply by: Adam E

0

Answer 1

We have suspension enhancement kits that fit your 2014 Nissan NV 2500 like the Timbren part #TNRNVHD but we do not have any air bag kits that fit.

view full answer...

Answer 2

Though I may have another option, I checked with Firestone and Air Lift and, unfortunately, neither currently make a kit that will fit a 2017 Nissan NV 2500. With that being said, the RoadActive Suspension Custom Leaf Spring Enhancement Kit…

view full answer...

Answer 3

You didn't say which year Nissan NV 3500 you have but as of right now there's only one generation. We don't carry any traditional air bag kits that you inflate or deflate to your liking that fit the NV 3500 but we do have the SumoSprings…

view full answer...

Answer 4

I have another suspension enhancement option for you, but at this time there is not a Firestore or Air Lift Air Helper Spring Kit that is confirmed to fit your 2020 Nissan NV 2500. While you are correct that the 5.6l V8 engine is the same engine used…

view full answer...

Answer 5

The Firestone System, part #F2430 you mentioned is not a fit for your 2015 NV 3500 but i do have a solution that will work for you. I recommend the Timbren Suspension, part #TNRNVHD. This is a simple installation by replacing the bump stops on your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Suspension Enhancement Options For 2020 Nissan NV 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching