Comparing The BAKFlip F1 And BAKFlip MX4 For The 2020 GMC Sierra 2500 With 6-3/4 Bed

Question

Question:

I have purchased several items from you in the past. I have a 2020 GMC Sierra 2500 6 3/4 foot bed I am looking for a Tonneau bed cover for. What is the difference between the Bakflip F1 and the MX4 covers?

asked by: Ben J

1

Helpful Expert Reply:

The BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass # BAK772133 and BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK448133 are very similar but there are a few minor differences.

The F1 has a rough texture that tends to hold up better against various conditions and does not get easily scratched or dented. The MX4 has a smoother appearance and texture and does not have a rough look or feel to it. I think the F1 looks better and it holds up better so that is what I would go with

Both of these covers listed above are confirmed to fit your 2020 GMC Sierra 2500 With The 6-3/4' Bed.

expert reply by: Andrew N

1

Answer 1

Hey Dan, for your 2023 Chevy Silverado 2500 the SumoSprings kit part #SSR-203-40-2 would be your best option as they have the best capacity to match what you'll be towing. I also really like that they are two piece. Are you wanting a…

view full answer...

Answer 2

Based on the capacities you mentioned of your 2021 Chevrolet Silverado 2500HD with the 6.6L engine you will not be over loading as you have a towing capacity of 18500lbs and your trailer only comes in at 13500lbs max. You will likely have some squat…

view full answer...

Answer 3

Hey David! As long as you don't go over the 3,000 lb capacity I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-HD. The RAS is nice because it won't have a negative impact on your unloaded ride quality. It can…

view full answer...

Answer 4

Hey Matt! The best SumoSprings for your 2024 Chevrolet Silverado 2500 are going to be the Rebel Custom Helper Springs item #SSR-203-40-2. These have a 3,000 lbs capacity so they'll work great with your 5th wheel trailer. The best part about these…

view full answer...

Answer 5

Hey Jeff, The best way to reduce chucking on your trailer, especially since you have a new truck and quality hitch is going to be to upgrade the trailers pin box to a cushioned or air ride pin box. Now figuring out which one works on your trailer…

view full answer...

Answer 6

Hey Justin, for your 2024 Chevy Silverado 2500 the big difference between the SumoSprings Solo part #SSR-207-47 and the Rebel part #SSR-203-40-2 is the weight capacity of either. The Solo can provide up to an additional 1,500 lbs of support and the…

view full answer...

Answer 7

Thanks for the pictures! I just spoke with my rep at Lippert and your Forest River Sabre has a 1621 pin box with a 15,500 lbs capacity. The Trailair Air Ride 5th Wheel Pin Box item #LC158778 you were looking at is exactly what you need. I have linked…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Comparing The BAKFlip F1 And BAKFlip MX4 For The 2020 GMC Sierra 2500 With 6-3/4 Bed

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching