Will MORryde Rubber Equalizers MR27ZR Raise A Trailer?
Updated 04/02/2021 | Published 03/30/2021
Question:
Will these raise the height of the trailer?
asked by: Duane G
Expert Reply:
The MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K # MR27ZR you were looking at measure 8" between the horizontal mounting holes, and 3-5/16" between the center of the horizontal mount holes and the vertical mounting hole as you can see in the included diagram.
If your current equalizer is taller than 3-5/16" then you will lower the trailer slight, but if it is shorter than 3-5/16" you will slightly raise the trailer.
The # MR27ZR is designed for Tandem axle trailers with 8000lb axles and 35" axle spacing, so as long as your trailer meets these requirements this would be a great option due to the rubber inserts that dampen road shock and offer up to 3" of suspension travel.
I included a video of the # MR27ZR for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Shop: Lippert Standard Replacement Shock - Black
- Shop: Lippert Heavy-Duty Replacement Shock - Yellow
- Video: In-Depth Review of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Shackle Upgrade Kit for Triple Axle Trailers w/ LRE Leaf Spring Suspensions
- Search Results: trailer shock kit
- Search Results: trailer suspension parts
- Search Results: shocks trailer suspension parts
- Q&A: Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
- Q&A: Dimensions of Replacement Dexter Bolt-On Shock Kit K71-697-00
- Search Results: morryde uo12~016
- Search Results: leaf spring hangers
- Search Results: morryde
- Search Results: spring mounts
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Suspension Parts
