Will the Hollywood Racks Trail Rider Bike Rack Work On a Jeep Wrangler

Question

Question:

I have a 1992 Jeep Wrangler with spare tire mounted on the rear tailgate. The tire extends 7 1/2inch beyond the pin hole in the Hitch. According to your information that should leave 7 1/4inch between the spare tire and closest part of the carrier. Is this sufficient room for a typical mountain bike? Thanks

asked by: Wayne R

0

Expert Reply:

The Hollywood Racks Trail Rider Bike Rack part # HR200Z is a great option for a Jeep Wrangler. There is typically plenty of space between the bike rack and rear spare tire due to the extended shank. We have tested this on several different Jeeps and several different bikes and have not ran into any issue. I have attached a few review videos below although your exact year may not be listed.

expert reply by: Conner L

0

Answer 1

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Answer 2

Hello again, Scott. So yes, a hitch mounted rack is definitely the way to go if you need to carry a few beach cruiser style bikes. We do have a solid 2-bike option that will work well for that. Here is what I recommend: - Hollywood Racks Trail Rider…

view full answer...

Answer 3

Hello Don, Great question, being able to get into the hatch of your Prius would be important to me as well. You will want to go with the Swagman XTC2 TILT #S64671 because it solves the exact concern you mentioned about getting stuck at the trailhead…

view full answer...

Answer 4

Hey Adam, sure thing! On the Kuat Pivot v3 #KU38CR (Passenger Side) and #KU98CR (Driver Side) you're measuring from the hitch pin hole on your actual accessory. If you already have your bike rack, or some kind of cargo carrier, measure from the…

view full answer...

Answer 5

Hey Kate! Yes, the Kuat Pivot v3 Swing Away Hitch Extender #KU38CR will work with your Hollywood Racks Destination E Bike Rack #HLY36GR and 50 lb e-bikes. The weight of your bike rack is 46 lbs, so with the two e-bikes you're at a total weight of…

view full answer...

Answer 6

Hi Taylor, Welcome to the bike rack world! A little movement is normal with most hitch mounted bike racks, but the Hollywood Destination 2 part #HLY94FR is designed with an anti rattle hitch pin, so it shouldn't have excessive side to side play…

view full answer...

Answer 7

Hey Patrick! It sounds like the biggest piece here will be the weight of the rack. A lightweight bike rack will make it easy to get on and off the hitch, and will be easy on your back. I recommend the Hollywood Racks Destination Bike Rack for 2 Bikes…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey Marc, sorry for the delay in getting back to you. I checked your question history and I don't see anything from a few weeks ago which can sometimes mean there was a typo in your email address and we sent it to wrong person. This rack has a…

view full answer...

Will the Hollywood Racks Trail Rider Bike Rack Work On a Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching