Flat Towing Recommendations for a 2021 Chevy Colorado 4WD
Updated 04/09/2021 | Published 03/29/2021 >
Products Featured in This Question
Question:
I am installing a Brake Buddy with 15 amp charging line and RoadMaster battery disconnect switch RM-766 in my 2021 Chevy Colorado. Do I connect the charging line to the hot side to the disconnect switch or the positive terminal of the battery itself? I assume any ground is ok for the ground of the charging line. Thanks
asked by: Ralph Z
Expert Reply:
The Roadmaster Direct-Connect Base Plate Kit # RM37VR will reuse the manufacturer hardware on your 2021 Chevrolet Colorado 4WD with neutral Transfer case. It does not require you to cut or grind on the frame like the Demco and etrailer options. This is why I recommend the Roadmaster over the others.
For tow bars I recommend the Roadmaster Nighthawk # RM-676. They allow your to direct connect to the base plate without the need of the crossbar. These will come prewired with 7-way motorhome and 6-way vehicle plugs. To go with this you will want the Towing Combo Kit # RM-9284-2. This kit also includes the wiring for your lighting as we do not have a vehicle specific kit for your Colorado. This wiring will not void your warranty.
I recommend the Roadmaster Automatic Battery Disconnect with Switch # RM-766. It will disconnect the power rather than removing the battery terminal when towing. On your Colorado the radio presets and settings will not be lost as the newer models have a memory feature that won't clear when the battery is disconnected. The Roadmaster Battery Charge Line Kit # RM-156-25 will ensure that your battery is fully charged when towing and not be drained by the additonal braking system that you will need.
For a braking system the two I recommend will depend on your motorhome. Both of these systems are proportional and will install under your hood so you won't have to store and reinstall a portable braking system every time you prepare to tow. Both systems also have emergency break away systems that will activate if your vehicle were to become separated from your motorhome.
Motorhomes with Air Brakes # SM99243
Motorhomes with Hydraulic Brakes # SM99251
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media







Continue Researching
- Shop: Base Plate for Tow Bar
- Video: 2003 Honda Element Blue Ox Base Plate Kit: Complete Installation
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: Trailer Wiring
- Search Results: tow bar base plate
- Search Results: diode kit flat tow wiring harness
- Q&A: Recommended Base Plate Kit for a 2003 Honda Element Using a Guardian Rock Guard
- Shop: Front Mount Hitch
- Shop: Trailer Hitch
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Blue Ox Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Roadmaster EZ Base Plate Kit - Removable Arms
- Q&A: Braking and Electrical Parts Needed to Flat Tow a 2021 Chevrolet Colorado Gas or Diesel
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Will BulletProof Hitches Extreme Duty Coupler Lock Fit 2019 Airstream Bambi
- Q&A: How To Set Transfer Case Of 2022 Chevrolet Colorado In Neutral To Flat Tow and Parts Needed
- Q&A: Difference In Appearance Between Roadmaster Base Plate Kit for 2026 Jeep Wagoneer
- Q&A: Do You Sell the Locking Pull Ring Tab for the Removable Arms on My Blue Ox Base Plate?
- Q&A: Parts Needed to Flat Tow 2020 Jeep Wrangler With Factory Bumper
- Article: Flat Towing Package for 2025 GMC Sierra 1500
- Article: Can You Flat Tow a 2024 Chevy Colorado?
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: Trailer Wiring Diagrams


Ralph Z.
1/1/0001
I am installing a Brake Buddy with 15 amp charging line and RoadMaster battery disconnect switch RM-766 in my 2021 Chevy Colorado. Do I connect the charging line to the hot side to the disconnect switch or the positive terminal of the battery itself? I assume any ground is ok for the ground of the charging line. Thanks