Is There a Hitch Available to Fit a 2020 Hyundai Elantra GT N-Line

Updated 03/23/2021 | Published 03/19/2021

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(23)

$62.25

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs

(2336)

$30.98

Question:

Do you have a trailer hitch and wiring for a 2020 Hyundai Elantra GT N Line?

asked by: Doug W

Helpful Expert Reply:

Yes. The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24905 will fit on your 2020 Hyundai Elantra GT N-Line as long as your vehicle was NOT manufactured in South Korea; the vehicles that were manufactured in South Korea do not have holes drilled for a hitch and thus have not been tested for compatibility. You can check the door manufacture sticker or VIN to determine where your vehicle was made; VIN with the second letter M denotes Korean-built.

For wiring you'll want to use the Tekonsha T-One Wiring Harness # 118692, which will give you a 4 way trailer wiring harness on your Elantra GT N-Line. To complete a towing setup you'll need a drawbar and hitch ball. For the drawbar I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs # 3594, which comes with a hitch pin included. Then you'll need a hitch ball; you can use either the # 19256 (1-7/8" hitch ball) or # 19258 (2" hitch ball) depending on the trailer you'll be towing.

I've linked some review and installation videos of some of these parts for you to check out, as well.

expert reply by: Erik B