Can Weight Distribution Help Sway on Aluminum Frame Trailer
Updated 03/22/2021 | Published 03/18/2021 >
Products Featured in This Question
Question:
I have 22 Aluma trailer i tow either 2 UTVs or a race car with a 2019 Raptor. The trailer is 1800 lbs empty and around 6500 loaded i think. I have replacement springs on the truck that are rated for 800 pounds in the bed or tounque. My issue is sway, it does move around in the wind and makes long hauls rough. Am i just using the wrong truck or can a WDH with sway solve? What can be used on an aluminum trailer? thanks
asked by: Brian J
Expert Reply:
It sounds like your weight distribution system is most likely rated properly but the sway you are experiencing is not something that a WD system would be effective at eliminating. Also worth noting is you said it's an aluminum trailer which is almost always excluded from use with weight distribution.
So see if you can move weight forward in the trailer and that will do a great job reducing persistent sway. And then to get rid of sway from high winds the Tuson Asymmetric Sway Control # 335TSC-1000 would be a great option. This installs on the trailer and with it's internal sensor will detect sway and apply the brakes in a manner that will stop it before you notice it.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer jack
- Search Results: stake pockets trailer tie down anchors
- Search Results: weight distribution hitch
- Shop: Stake Pocket Tie-Down Anchor - Black Powder Coat - 2-1/4" D-Ring - 4,000 lbs
- Search Results: recessed mount trailer tie down anchors
- Search Results: trailer hitch ball mount
- Search Results: weigh safe trailer hitch ball
- Search Results: price match
- Q&A: Is There a Version of the Andersen Weight Distribution System that Has 2-5/16 inch Ball
- Video: Review of Weigh Safe Built In Scale Hitch 2 Stainless Steel Balls 2 Inch Receiver - WS66ZR
- Video: Review of Weigh Safe Complete Lock Set - WS38ZR
- Shop: Stake Pocket Tie-Down Anchors - Black Powder Coat - 2-3/4" D-Ring - 4,000 lbs - Qty 2
- Shop: Brophy Stake Pocket Tie Down Anchor - Black Powder Coat - 3" D-Ring - 4,000 lbs
- Shop: Big Truck Big RV Tongue Weight Scale for Trailers with 6" SnapPad - 2,000 lbs
- Q&A: Can you Back Up With the Weigh Safe Weight Distribution Hitch Before Making the Adjustments?
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW
- Video: Review of ABS Fasteners Tie Down Anchors - Trailer and Truck Tie-Down Anchors - ABS69FR
- Shop: Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4
- Q&A: Can I Put a Weight Distribution Hitch on a Legend Aluminum Enclosed Trailer?
- Video: Detailed Breakdown of the Thin Walled Socket for Equal-i-zer Hitches
- Video: Safer Smoother Towing: Inside Equal-i-zer Weight Distribution Hitches
- Q&A: How to Choose Correct Capacity for Trailer Safety Chains
- Video: Review of Trailer Valet Trailer Jack - JXS Sidewind Trailer Jack With Movable Leg - TV36FR
- Video: A Look at the Trailer Valet JXS Drill Powered Drop Leg Trailer Jack with Footplate
- Q&A: Can I Use a Weight Distribution Hitch on a Large Aluminum Trailer
- Q&A: Capacity of Shocker Hitch XRC Ball Mount With 2-5/16" Hitch Ball SHK94RR
- Q&A: Recommended Equal-i-zer 4-Point System For A Trailer With About 900 lbs TW
- Shop: Brake Controller
- Shop: Trailer Wiring
