Recommended Lift Kit For 2018 Winnebago Micro Minnie 2106FBS

Question

Question:

looking for 3 1/2 axel riser kits for a 2018 winnebago 2106FBS. The axle is a Lippert 3500lb Torsion Axle.

asked by: Bob G

0

Expert Reply:

To lift your 2018 Winnebago Micro Minnie 2106FBS with tandem 3500lb Lippert torsion axles need the Axle Riser Kit - Single Diamond Torsion Axle - 3-1/2" Lift # LC270682 if your axles have the diamond axle tube, or # LC382741 if you axles have the square axle tube.

Each of these kits will give you the 3-1/2" lift you are looking for, and since your trailer has tandem axles you will need two kits, since one kit does one axle.

I included a video of the # LC270682 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Hey Brent, I attached a link down below to the install instructions for the Fastway WD system part #FA92-00-1000 for you to check out as well as a couple install video links. It does sound like you have an older version of the system and that's…

view full answer...

Answer 2

Your 2018 Winnebago Micro Minnie has 3500 lb torsion axles but they haven't been clear as to the manufacturer. If the axles have mounting holes 8 inches on center, then you can use the Dexter Torflex Lift Kit - Tandem Axle - 2-5/8" Lift…

view full answer...

Answer 3

The Lippert #LC270682 Axle Riser Kit you'd specified is indeed the correct kit for your application. The riser kit would provide 3-1/2 inches of lift, and each kit will raise one axle. So, for your tandem axle trailer you'd need to order two…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Recommended Lift Kit For 2018 Winnebago Micro Minnie 2106FBS

Featured Help Information

Miscellaneous Media

Continue Researching