Parts Needed to Add Electric Drum Brakes
Updated 03/17/2021 | Published 03/12/2021
Products Featured in This Question
Question:
I have a 3500 lb axle 2 3/8 diameter, with 4 bolt hole flange. I need to put brakes on it. Im thinking of electric brakes. With this information can you tell me all the parts I will need to add brakes to my trailer. thank you.
asked by: Michael G
Expert Reply:
Please review these suggestions and compare to what you have. I suggest the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs, # AKEBRK-35-SA. These are self-adjusting driver's-side and passenger's-side electric brakes are 10" x 2-1/4". Brake pads are made of friction material for improved braking and longevity. E-coated backing plates resist rust. Fit 14" to 15" wheels. Designed to fit most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO. 10" diameter x 2-1/4" wide, 4 bolt mounting flange bolt pattern. You willalso need the Brake Mounting Hardware Kit for 7" and 10" Brake Assemblies, # BIK-00.
I recommend the Deka Jacketed 2 Wire, 10 Gauge, Brake Wire, # 10-2-1, for your needed wiring and the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K if you need/choose to replace hubs.
I recommend the Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable, # A10-7W6.
With this upgrade to your trailer, if you need a brake controller and wiring please let me know your vehicle as we have a wide selection of custom wiring harnesses for almost all vehicles. For a brake controller I suggest the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.
Please review the links I attached, if you need something different then I am certain we can provide it.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Recommended Replacement Entry Door Latch for Fastec 23348 CR6
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle