Replacment Chain Hangers for EAZ Lift Weight Distribution System  

From what I could find online it looks like the clamps you are talking about for your EAZ-lift Weight Distribution (WD) system are similar to the Reese Lift Brackets #RP6637. For this application we do have the bolt on Chain Hangers #RP58305 for…

We do carry weight distribution systems with shorter spring bars, however, all of the spring bars for the Reese SC weight distribution systems are the same size. Unfortunately, they do not make shorter spring bars for this system. Instead, I…

If you are worried about drilling into the frame of your aluminum trailer when installing the Reese Strait-Line Weight Distribution System, like #RP66073, then I recommend the Equal-I-Zer Weight Distribution systems. The Equal-I-Zer WD system, like…

I spoke with my contact at Reese and he informed me that the way you set up your weight distribution system with the Chain Hangers #RP58306 is perfectly fine. He said that every trailer will have slight differences between them and since you are at…

Thanks for providing as much information on your setup as you did. That makes my job very easy! So your trailer at it's heaviest would be 3,500 lbs which would mean the tongue weight could range from 350 to 525 lbs. The part #FA92-00-0450 is most…

On a trailer frame that is 2 inches thick and 5 inches tall, the Reese clamp-on chain hangers, #RP58306, will fit. The brackets fit a frame up to 6-1/2 inches tall and 2-3/4 inches wide. With an aluminum trailer frame, you will need to consult the…

Ideally, you would want the chains to be straight up and down. A slight angle is permissible. What I recommend is to change the chain hanger type being used. There are 2 options. First we have a type that bolts to the side of the trailer frame,…

My contact at Reese stated the instructions provide the user with a small area to make adjustments as needed between 18 inches and 19-3/8 inches from the center of the coupler. Also you can make sure the bracket that holds the chains are the…

The Pro Series Weight Distribution System w Friction Sway Control, part #PS49582 and #83660, is designed to be used with systems that have a tongue weight between 550 and 750 lbs tongue weight. Using a system that has much heavier duty spring bars…

I have a solution for you, but we do not currently have any Husky specific chain hangers available. However, the Chain Hangers for Reese Weight Distribution Systems - Clamp On #RP58306 will work just the same to replace the clamp on brackets from…

First, let me just say that the Airstream Bambi has got to be the cutest name for a travel trailer that I have ever heard. Please send some pictures of it if you can! For weight distribution you will need to go by the total tongue weight. This is…