Can I Use the B&W Gooseneck Ball BWGNXA2062 with a Curt OEM Style Gooseneck Hitch for 2019 Ram 3500

Question

Question:

Will the BandW Gooseneck ball Item # BWGNXA2060 fit the Curt OEM Style Gooseneck hitch #60633 that I currently have installed on my 2019 Ram 3500? I like the idea of the handle on the BandW for removal instead of the tab on the curt to avoid getting grease on my hands. The storage case would be nice too, but unfortunately the safety chain loops would not be needed.

asked by: Colin

1

Helpful Expert Reply:

Yes. You can use the B&W Ball and Safety Chain Loop Kit # BWGNXA2062 with your Curt OEM Style Gooseneck Hitch # C60633, since the Curt gooseneck hitch is designed to emulate the OEM gooseneck hitch.

expert reply by: Erik B

1

Answer 1

The Andersen 5th wheel hitch that mounts to a gooseneck hitch just requires a standard gooseneck hitch, and will work with the underbed Curt gooseneck hitch that fits your 2019 Ram 2500, which is the following: - Curt Custom Underbed OEM-Style…

view full answer...

Answer 2

I spoke with my contact at Curt who told me that there is an access hole at the bottom of the OEM gooseneck hitch on your 2016 Ram. You are going to look for an aluminum or plastic plug that once removed will allow you to retract the locking…

view full answer...

Answer 3

Hey Jim! If you're looking for a replacement hitch ball for the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item #C60633, you'll want the Curt Pop-In Ball item #C60629. The Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan…

view full answer...

Answer 4

I reached out to my contact at Curt and the center of the gooseneck hole of the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 35,000 lbs #C60633 will be right at 34-3/4" back from the front of the 6-1/2" bed in your 2020 Ram…

view full answer...

Answer 5

I have a couple solutions for you and yes there is a goose box that will work with your Lippert Turning point pin box. It is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Turning Point - 21K - 3.5K TW item #GY48GR. You can…

view full answer...

Answer 6

That's great information - I appreciate it! The Gen-Y Executive needs at least 1,600 lbs tongue weight to be able to use the lightest option. When using a 5th wheel or gooseneck setup you want your tongue weight to be 20% of the weight of the…

view full answer...

Answer 7

No, I am sorry Rory we do not but congrats on the new truck! The Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item #C60633, you referenced is compatible with your 2025 Ram 2500. It mounts to predrilled holes with included hardware. This…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Can I Use the B&W Gooseneck Ball BWGNXA2062 with a Curt OEM Style Gooseneck Hitch for 2019 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching