Ultimate Trailer Jack For 2018 Keystone Bullet Crossfire 2200BH Travel Trailer

Updated 01/27/2021 | Published 01/24/2021

Products Featured in This Question

Ultimate Trailer Jack - A-Frame - Topwind - 15-1/2" Lift - 2,000 lbs

(868)

$89.90

Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs

(140)

$22.03

Footplate for 2-1/4" Round Tube, A-Frame Jacks - 2,000 lbs

(59)

$19.09

Question:

Hello, I am trying to find a suitable manual tongue-jack for my 2018 Keystone Bullet Crossfire 2200BH travel trailer. I believe that the following product you offer would work, could anyone there help confirm? Item # 322-RDJ-2K Thank you!

asked by: Matthew B

Expert Reply:

To make sure that the Ultimate Trailer Jack # 322-RDJ-2K will fit your 2018 Keystone Bullet Crossfire 2200BH travel trailer you'll need to take some measurements. Make sure that the opening of your trailer coupler is at least 2-1/4 inches in diameter so the outer tube can slide in. The mounting holes are oval but from the center of each to the other it is 3 inches apart. Since they are oval there is a bit of wiggle room to line up with your coupler. The side of the three sided mounting plate that will be facing your trailer is 4-7/8 inches apart and the other two are 4-5/8 inches.

To help the inner tube of the jack from getting scuffed up I recommend getting the # JF-101BK and for moving it's best to have a wheel attachment # JC-102 but by using the caster, you will lower it's capacity to 1,200 lbs.

I've included a video for you to watch to learn a bit more about the jack!

expert reply by: Adam E