Will the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Fit a 2018 Ford F-150 Raptor

Question

Question:

Will this work on my 2018 Ford Raptor? Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Item # HM56009 Thank you.

asked by: Chris

0

Expert Reply:

Yes, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56009 is a fit for a 2018 Ford F-150 Raptor.

expert reply by: Conner L

0

Answer 1

Although we have wiring harness options that will work for your truck, the Hopkins #HM56009 taillight harness for towed vehicles wouldn't work for your 2021 Ford F-150, it only fits up through the 2020 model year. I'd recommend using a diode…

view full answer...

Answer 2

We've actually heard of this issue before. You can thank one of our tech support guys for finding a simple solution for this. Even Hopkins wasn't aware of it. First of all the harness is just fine and you didn't install anything…

view full answer...

Answer 3

I really like the Roadmaster flat towing products (with the exception of their brake systems) so I'm glad you asked about them for your 2024 Ford Maverick! Here are the parts I recommend using for flat towing your vehicle: - Roadmaster…

view full answer...

Answer 4

There are a couple of options for a wiring harness for your 2020 Ford F-150 depending on whether or not your motorhome uses a 4-way connector or a 7-way connector. Both of these work with LED lights. I have listed them below: 4-Way Connector -…

view full answer...

Answer 5

In order to flat-tow a thirteenth generation (2015-2018) Ford F-150 with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Will the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Fit a 2018 Ford F-150 Raptor

Continue Researching