Replacement Brakes for Gatormade Gooseneck Trailer with 8K Lippert Axle
Updated 01/20/2021 | Published 01/17/2021
Question:
I have a 2014 gatormade 20k gvw gooseneck trailer. I need brakes for. It has lippert axles the customer part number is 210393 and the serial number for the axle is 045-002748598 they have oil bath hubs. Is there anyway you can help me determine what parts i need to repair the brakes? Thank you.
asked by: Brooks
0
Expert Reply:
I spoke with Lippert and was able to confirm you need the Electric Trailer Brake Kit part # AKEBRK-8.
expert reply by:
Conner L
0
Product Page this Question was Asked From
etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: pintle hitch
- Search Results: equalizer pin
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs
- Q&A: Voltage at Brake Magnets is 8 Volts with Brake Controller Set to Maximum
- Search Results: trailer brakes
- Search Results: trailer brake pads
- Search Results: 8000 lbs springs
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles - 9/16" Diameter
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Q&A: Brake Pads/Brake Shoes For Gatormade Trailer With 10,000 lb Dexter Axles
- Search Results: ob27377
- Video: Let’s Check Out the Unitized Oil Seal
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Identify What Wheel Bearings and Grease Seals are Needed on Trailer Axles
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Search Results: tire lug wrench
- Q&A: Proper Direction To Install A Hub Seal On Trailer
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: Electric Brakes for Rockwell 8,000 lb Torsion Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function