Determining Correct Replacement Leaf Springs For 2009 Venture VATB 10625 Boat Trailer
Updated 12/23/2020 | Published 12/19/2020 >
Question:
I have a 2009 Venture trailer VATB 10625. Can you tell me the proper Double eye Leaf springs to place on this trailer. Right now there are 3 different lengths of springs on the trailer. 6 leaf but 25, 25.25 and 25 1/2
asked by: William L
Expert Reply:
I may have an option for you but you will need to know the axle rating of the axles on your Venture VATB 10625. I reached out to Venture but they were unable to provide that information.
Since all of the springs are within 1/2" I believe that you actually have 3 springs that started the same length, but over time springs flatten out and get longer and with three axles it is definitely possible that each spring is at a different wear amount based on it's location and the load of your trailer.
If you need a replacement that most likely option is the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long # e28SR. The reason I say most likely is this is for a 5000lb axle, you will want to confirm the weight rating of your current axle as the number of leaf's is not really important, but matching the spring rating to the axle rating is crucial.
If you find you have a different weight axle, or if you can provide an axle model and serial number, I would be happy to recommend the correct leaf spring for your trailer.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles - 25-1/4" Long - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Shop: Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Video: Complete Breakdown of the Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: Replacement Hub And Spindle For TieDown 3,500-lb Axles
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Q&A: Choosing the Right Leaf Spring Capacity for 3,750 lb Trailer Axles to Prevent Sag
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended Leaf Springs for 4,400 lb Axle Based on Axle Position and Hanger Locations
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: Any Leaf Springs Designed for Boat Trailers Used in Salt Water
- Article: Determining Trailer Tongue Weight
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams

