Replacement 2-3/4" Wheel Studs For A 2011 Heartland North Trail Fifth Wheel

Question

Question:

I need drum STUDS ONLY for a 2011 North trail 5th wheel by Heartland. Takes 5 of them.

asked by: Kyle T

0

Expert Reply:

A 2-3/4" wheel stud for your 2011 Heartland North Trail fifth wheel is the Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1 Item # 7-232.

expert reply by: Shane H

0

Answer 1

Hi Robert! The 17-1/2" wheels are a bit more limited than other offerings, but I think you may be interested in the following two options: Americana Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" - 8 on 6-1/2 -…

view full answer...

Answer 2

A Dexter 8k hub would have an 8 on 6-1/2 inch bolt pattern like what the part #TA45ZR has. This is also a 17.5 inch diameter trailer wheel. For a mod style wheel instead, we have the part #TA35ZR.

view full answer...

Answer 3

Hey Robert, To find your offset you'll need to measure from the mounting surface of your lugs to both outer edges of your current wheels. A negative offset will move the tire further away from the trailer while a positive offset brings the tire…

view full answer...

Answer 4

The Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim is offered in both silver as part #TA35ZR and white as part #TA36MR. That said, they are designed for use with 5/8" wheel studs. The only 17-1/2" wheels we offer…

view full answer...

Answer 5

I have attached for you below a list of all our 17.5" x 6.75" trailer wheels with an 8 on 6-1/2" bolt pattern below. There are a few different types of wheels in this list such as aluminum/steel, dually/standard, and hub/lug centric.…

view full answer...

Answer 6

It might be possible to change out the studs in your hub from 9/16 to 5/8 if they are drive-in studs and not the type that threads in. If they are drive in and the diameter of the knurl end is approximately 0.6875 inches then you can replace them. We…

view full answer...

Answer 7

Hey Don. The Taskmaster Modular Wheel item #TA35ZR works with 5/8" lug studs. It does not have a center cap. The pilot hole diameter is 4.76". This is a 17-1/2" wheel with a 8 on 6-1/2 bolt pattern. It has a 5,956 lbs capacity per…

view full answer...

Answer 8

All of the trailer wheels we offer that are 17.5 inch in diameter are hub-piloted like the Taskmaster Solid Center Wheel #TA45ZR that you referenced. At the very least you'd have to go with new hubs that match this style of wheel as there…

view full answer...

Answer 9

You can potentially change wheel/tire size if you have the clearance but you can gain load capacity more easily by keeping your existing rims and switching to a Load Range G tire in your current size ST235/80-16. Westlake Load Range G radial tires…

view full answer...

Answer 10

What is the width of the wheel? In order to determine what offset you have I would need to know the current width so I can see what your 4.5 inch dimension indicates. A zero offset means the hub face dimension is perfectly centered so I would need…

view full answer...

Answer 11

A negative offset like the offset on the Americana Modular Wheel w/ -0.5 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver #AM22461 reduces the back-spacing. Since this is a 6-3/4" wide rim that means the back-spacing is 3-7/8"…

view full answer...

Answer 12

A Dexter 8k axle is going to have a hub installed on it that has an 8 on 6-1/2 inch bolt pattern. I attached a page that has all of the 17.5-inch rims we offer with this bolt pattern for you to check out. The most popular wheel is the part #TA35ZR…

view full answer...

Replacement 2-3/4" Wheel Studs For A 2011 Heartland North Trail Fifth Wheel

Product Page this Question was Asked From

Continue Researching