When you’re hauling serious weight, this wheel keeps things steady. The Taskmaster Modular Wheel measures 17-1/2" x 6-3/4" and carries up to 6,005 lbs. It’s made from heavy-duty steel with a sturdy modular design, so it handles the kind of loads that demand confidence mile after mile.
The +0.08" offset keeps the centerline in line with your setup for balanced handling. Because it’s hub-piloted, the wheel centers on the hub itself rather than the lugs, giving you a solid, true fit every time. It’s designed for use with 5/8"-18 flange nuts (sold separately), the right hardware for secure mounting on a hub-centric design.
Moisture and road grime don’t stand a chance here. The wheel goes through a zinc phosphate bath, an acrylic e-coat primer, and a baked-on DuPont white powder coat—on both sides of the rim. That triple process seals out rust and keeps the finish looking clean and bright through years of use.
Every detail’s accounted for. A metal valve stem is already included, and the wheel meets SAE J1204 standards for quality and durability. With its 8 on 6-1/2" bolt pattern, 4.76" pilot diameter, and 2-year limited warranty, it’s built to handle demanding jobs without cutting corners.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Taskmaster 17 and a half inch by six and three quarter inch white modular wheel with a positive offset and has an eight on six and a half inch bolt pattern. Now this is a heavy duty steel wheel, it has the eight hole modular design which is sturdy and corrosion. This is a design, you can see it has the eight round holes that go around the wheel. These are designed for use on trucks, buses, and trailers. Now on this wheel, they do use a three step finishing process, which will first include a zinc phosphate bath, then an eco-primer, and then a white powder coat on both sides of the wheel.
This wheel is a hub piloted wheel, which means it'll require an exact fit of the center hole right here, this pilot hole to the hub on your vehicle. The pilot hole diameter on this is 4.76 inches. Now, hub piloted wheels do require the use of flange nuts for installation. Those we do sell separately on our website. They're usually listed on this product page as a related product.
And the size of the flange nut that's used is five eights of an inch by 18. Now this wheel does have a slight positive offset of 0.08 inches, and a positive offset means that it'll move this wheel and tire closer to the center line of the trailer. If you notice, they do include a high pressure metal valve stem already installed in there. Now this wheel does meet the SAE J1204 Standards. A few measurements on this.
We talked about the diameter on it being 17 and a half inches, and when you measure it, it's the inside measurement. So if we take our tape measure and if we go all the way across, you'll be able to see it's measuring 17 and a half inches for the diameter. The width will be the same way. You're measuring bead seat to bead seat, so inside the inside. So if we go right across, six and three quarter inches for the width, the bolt pattern on this wheel is a eight on six and a half inch bolt pattern.
You can see the holes right here. If you wanna measure the bolt pattern on the wheel, that's an even number of lugs. In this case, eight. It's pretty easy because the lug holes are right across from each other. So when you go to measure it, all you have to do is pick one of the holes like this one, measure from the center of this hole, directly across to the center of the hole right across from it. On this one, it'll measure six and a half inches, so that means it's an eight on six and a half inch bolt pattern. And the weight capacity on this wheel, which will be stamped in the back here, is 6,005 pounds. But that should do it for the review on this Taskmaster 17 point a half inch by six and three quarter inch white modular wheel with a positive offset, and the eight on six and a half inch bolt pattern..
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
I bought 4, 16'' Taskmaster wheels to up grade my trailer to a heavy duty tire that was not available in a 15''.The price was outstanding and first class construction.They worked out so well for my race car trailer that I spread the word to friends.So far we have purchased 18 wheels to up grade all of our trailers.Thanks Etrailer !!
I couldn't be more pleased. Fair price, fast shipping, & the most accurate tracking I've ever seen. Thank you!
After getting my new tires from etrailer I discovered that the rims I had which I was going to have them mounted on were badly corroded on the rear side. I called etrailer to asked them if I could get the rims with high pressure stems instead of the standard ones that came with the rims. The woman I spoke to was great (Katie). She looked up the right stems within a minute or so. I also asked her about balancing the tires. She was very knowledgeable and helpful. The Rims and stems came within 6 days, had them mounted and am about to take our RV trailer for a 800 mile trip. Thanks etrailer for all your help!
Great wheels ! Would by again if needed ,held up during a high speed tire blowout at 75mph with zero damage to the wheel. Have over 10,000 miles highway use YTD
After placing my order these arrived sooner than the projected date. I had upgraded to a sturdier axle on my trailer and needed more substantial wheels (with a different bolt pattern). Compared to other retailers these were relatively inexpensive, which is exactly what I wanted for my trailer. What else can I say? The wheels on the trailer go round and round....
The trailer rims were priced right and exactly what I was looking for, see the attached photo.
Problem solved with the zero offset wheels, since the rims on my used trailer were old Chevy wheels and were blowing my tires out by rubbing the inside wheelwell.
Thanks!
Great looking wheels. Speedy shipping. Will recommend
You had them in stock and fill the order in a timely manner. Received the rims in excellent condition. Thank you for your service in providing all the great products for us trailer haulers.
Product looks great . Love the tracking on package . I was surprised Crossing stated on ground shipping was so quick ,less than a week .
Rim arrived in great shape and looks great. I love the coating. This wheel is to replace a missing spare on a used Malibu boat purchase. I couldn’t get myself to just settle for a plain painted wheel even if it is to be used as a spare, this will add about of style without breaking the bank.
Great packaging quicker delivery than expected. It's an identical wheel that I have on my Ski-Doo trailer. Perfect spare.
All wheels arrived with chips on edges of rims inside and out. These are for a boat trailer so I had to use paint touch up so they will not corrode .Pressed for time so I had to put them on. Wheels should have been packaged better to prevent this from happening.
Been ordering from etrailer for a few years now. Product lists are VERY easy to browse, prices are outstanding, shipping is free, and never had any issues or had to return or even contact customer service for any reason. Just got a set of the black 15" trailer rims and they run great.
I bought this Taskmaster white modular rim as a spare for a utility trailer so I would not get stranded on the road with a flat. The rim was good quality and the packing job was fantastic with a sturdy box with loads of shipping paper to protect the product. I really appreciated the valve stem coming with the wheel to save me looking for one .Service at etrailer.com was outstanding with good prices and fast shipping.
Very nice powder coating on heavy duty 110psi rated wheels that arrived when promised. For someone looking for a great looking RV wheel without the price of aluminum alloy wheels and much easier to clean these are excellent value in my opinion.
Awesome customer service. Fast shipping and great price. Needed to upgrade to larger tires and wheels after a dual blowout on our Rv. Called and wheels were delivered within 2 days of order being placed.
Lowest prices rims with the highest load rating I could find. Bought these to replace a mix match set that was rusty for a used dump trailer I just bought. Found China tires 225/75/15 load e the red and blue pin stripe really adds to the white color of the rim. I’m right at 100 dollars per wheel tire can’t complain
So far so good. Replaced old bent trailer wheels (galvanized spoke type) with these. Read that the modular wheels are a little stronger than the spoke type so giving them a shot. Trailer is 49’x105”, Aluminium/steel, boat type, fifth wheel, with mini spread 6k torsion axles. About 3.6k lbs empty; normally 8~15k lbs loaded. Since it’s setup mini spread the tires scrub quite a bit. Was running E load range 235/85/16’s but switched to F load range, same size (Incredible difference longevity wise/they’ve been great! Hercules H-901). Anyways, I did lots of research and found out that these rims are rated for up to 120psi (tires are 105psi). You can run F range tires on these no-problem. Supplied valve stems are only good for like 80psi (rubber snap in) so I ordered some 120psi (metal bolt in) stems separately. Understand the wheels are still rated for the same amount of weight, but if you’re tired of replacing trailer tires constantly or, like me, have a mini spread or spread axle setup, F load range is the way to go.
The wheel arrived on time and as advertised. It's a great product, very sturdy wheel. Mounting the tire on it was no trouble. Also customer service has been very attentive for several of my orders now, so kudos for that.
Great item, quick shipping
Fast order process. Fast shipping. Excellent quality product. Keep up the good work.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.