Square U-Bolt Kit for Mounting Leaf Springs SP-177275 to 1-1/2 Inch Square Axle
Updated 12/15/2020 | Published 12/11/2020
Products Featured in This Question
Question:
I am replacing the leaf springs on an old boat trailer. I have selected Slipper leaf springs 1 -3/4 inch SP177275 but I am uncertain on U-Bolt selection. A mounting plate is already welded to the 1 1/2 inch square axle. I have selected U-Bolt mounting kit CE23102 as the closest I could find on your web site. Am I on the right track or is there a better choice to mount these springs? Thanks.
asked by: Wynn W
Helpful Expert Reply:
You have done your homework because you are on the money with the correct U-bolt kit to mount the 2-Leaf Slipper Spring w/ Radius End for 1,000 lb Trailer Axles - 24-5/8" Long # SP-177275.
The kit you mentioned, the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 will work wonderfully for this application so you're all set.
I have added links below to video reviews of both products as well if you'd like to check them out.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Standard Grade
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ce23002
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Search Results: 48 8 tire
- Search Results: hubs for 1 inch spindle
- Video: Ultimate Overview of the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Review of the U-Bolt Plate for 1-1/2" Square Trailer Axles with 1-3/4" Wide Springs
- Video: Complete Breakdown of the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: Center Hole of U-Bolt Plate Isn't Large Enough Troubleshooting
- Q&A: Orientation of U-Bolt for Installing Leaf Springs on a Trailer
- Q&A: U-Bolts and U-Bolt Plate Recommendation for Installing Leaf Springs on a 1-1/2 in Square Axle
- Q&A: U-Bolts And Mounting Plates For A 1-1/2" Square Trailer Axle
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: What Kind Of Bushings Does The CE Smith Triangular Equalizer CES86WR Have?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: How to Replace Trailer Leaf Springs in 5 Steps