Replacement Bearing Kit for Hubs with L44649 Outer Bearing and 442251 National Grease Seal

Updated 12/09/2020 | Published 12/07/2020

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2953)

$15.39

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2752)

$7.47

Replacement Trailer Hub Bearing - L44649

(2138)

$22.32

Replacement Trailer Hub Bearing - L68149

(2138)

$17.57

Question:

2005 Haulmark trailer M# RVT 85X19DT2 / GVWR 7000 Not able to get all the numbers off the bearings/ seal. Outer bearing L44649?, Inner seal 442251 National? How do I find out what bearing kit i need, looking for bearing kits for both axles.

asked by: Martin R

Helpful Expert Reply:

In order to find the correct bearing kit you will need to know all of the components that it contains, including either the numbers of both bearings or their sizes; the good news is that most of this can be determined with the information you've provided.

It appears that the most likely configuration for this trailer is 2- 3500-lbs axles, which would match up with your outer bearing being an # L44649; additionally the National 442251 seal has an inner diameter of 1.719" and outer diameter of 2.565", so the replacement seal would be the # 58846 . These would be paired with an # L68149 inner bearing, so the complete kit with all of these components is the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100; for a tandem axle trailer you would need 4 of these kits- 1 for each spindle/hub.

I've also linked our entire selection of hub and drum assemblies that uses all of these components in the event that you want to replace everything.

expert reply by: Erik B