Upgraded Converter for WF-8945 to Use Lithium Batteries

Question

Question:

I have a WF-8945, and am looking to switch to a converter that charges lithium batteries. Can you tell me what model I need to convert? Thanks

asked by: John D

0

Expert Reply:

The correct converter for Lithium batteries that works with your WF-8945 is the Lithium Converter for WFCO RV Power Centers - 45 Amp # PD4645LIV. This will be a direct replacement and a fairly straightforward swap out.

I've linked our review video of this part for you to check out, as well.

expert reply by: Erik B

0

Answer 1

Hey Wayne, the only difference between the Furrion Built-In RV Convection Microwave and Air Fryer #FR77AD & #FR82TD is that #FR77AD includes the trim kit and #FR82TD does not. Otherwise, they are the exact same microwave. Now between the Furrion…

view full answer...

Answer 2

The Optronics Trailer Clearance or Side Marker Light part #MC44RB for red or part #MC44AB for amber work great to replace the old discontinued Glo Brite 126R/126Y. They are not the exact same but very similar in design and dimensions. They feature a…

view full answer...

Answer 3

To replace your GloBrite 126 marker lights you can use the #MC44RB. These lights are 2-wire incandescent lights measuring 4" long by 1-1/2" wide (same as your existing marker lights) and will work great for your trailer.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hello Andy, Great question. Your current Furrion Built-In RV Microwave - 900 Watts - 0.9 Cu Ft - Black #FMSN09BL requires a cutout of 20-1/4" wide x 13-7/8" tall x 14-5/8" deep. The Furrion Built-In RV Convection Microwave and Air…

view full answer...

Answer 11

Douglas thanks for the photos and the details really helped. For your 2020 Ram 2500 short bed without the OEM puck system, I recommend this setup: B&W Companion Sliding 5th Wheel Hitch w/ Turnoverball for Ram #BW28QR This gives you a removable…

view full answer...

Upgraded Converter for WF-8945 to Use Lithium Batteries

Featured Help Information

Miscellaneous Media

Continue Researching