Can BedRug be Left in Truck When Installing Slide In Camper

Question

Question:

Can I leave a bed rug in place and still use my slide in camper?

asked by: Dennis W

1

Helpful Expert Reply:

Yes BedRugs like the # BRQ17SBK can be left in the bed of a truck when installing a slide in camper. The BedRug would not affect the fit of the camper and also would not get damaged.

expert reply by: Jameson C

1

Answer 1

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Hey Paul; the Thule TracRac SR #TH43002XT-780 is a really nice rack and a great choice for your 2025 Sierra 2500. Since this installs on top of the bed rails you will need a tonneau cover that mounts inside the bed rails. Also, since the uprights…

view full answer...

Answer 7

Hey Joe! Based on what you were looking at I'm assuming you want to add a ladder rack to carry your kayaks. I'm also assuming you have the 6-1/2' bed on your truck. Since you have the BAKFlip MX4 the best option is to add the TruXedo…

view full answer...

Answer 8

Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.

view full answer...

Answer 9

Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…

view full answer...

Answer 10

Hi there Ron, it looks like as long as your 2024 Ford F-350 does not have dual rear wheels the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH39CR will fit. If you do have dual rear wheels, then you'd need to use the EcoHitch Hidden Front…

view full answer...

Answer 11

It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…

view full answer...

Answer 12

Yes, it does Gary! The Blue Ox Base Plate Kit item #BLU86HR has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

view full answer...

Can BedRug be Left in Truck When Installing Slide In Camper

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching