Correct Seal For 2.562 Boat Trailer
Updated 11/02/2020 | Published 10/30/2020
Products Featured in This Question
Question:
I recently purchased boat with trailer. I removed the wheels and hubs to check and service the bearings. After removing, it appear to have a seal saver or an improved seal system installed. My problems is I need new seals and the o-ring that is part of the install. Numbers on the old seals.... 2.562, 1.862, 562, 591 ???? Your help is greatly appreciated.
asked by: Mike R
Helpful Expert Reply:
After running the numbers the Seal Set # BB60010 you were looking at is for the L68149 Inner Bearing or the 1.810 Bearing Buddy. I don't think that is what you're looking for. I found this Seal Set # BB60002 which is for LM48548 or L68149 Inner Bearing and also for a 1.980, 1.968 or 2.562 Bearing Buddy. The 2.562 matches the seal number you provide and this is the best match I could find on our site. I've included a video Randy made to help you with the install!
Product Page this Question was Asked From
Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.88 Inch I.D.
- 2.36 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 32372
- Search Results: 68149
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Q&A: Grease Seal With 0.50 Inch Width, 1.68 Inch Inner Diameter and 2.33 Inch Outer Diameter
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Q&A: What Seal Is Needed To Replace NAPA Seal 17144 And Can Work With Bearing Buddy Bearing Protectors?
- Q&A: Bearing Buddy Recommendation for Hub with Bearing Number L68149
- Q&A: Recommended Brake Assemblies for Karavan Boat Trailer with 3500 lb Axle
- Q&A: How do Bearings and Hub Seals Install on a Boat Trailer Hub
- Q&A: Recommended Seal For Bearing Buddy Protectors
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Video: Checking Out the Aluminum AM03 Series Black Machined Trailer Wheel
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)