Comparing Draw-Tite Trailer Hitches 75033 and 75099 for a 1990 Chevy C/K 1500

Question

Question:

What is the difference bewteen part# 75033 and part# 75099? I have a 1990 Chevrolet 1500 pickup reg cab 8ft bed.

asked by: Charles

0

Expert Reply:

The main difference between Draw-Tite trailer hitches # 75033 and # 75099 is the placement of the receiver tube on the cross member. On 75033 the receiver is attached to the rear part of the cross member. On 75099 it is welded below the cross member so that the cross member will not be visible. I have included a picture showing the hitches next to each other for a better visual. Either hitch will fit and they have the same specs. It is just a matter of how you want it to look.

expert reply by: Michael H

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Draw Tite Class III hitch part #75033 that you referenced does fit your 1989 Chevy K1500 with the 37 inch frame dimension and step bumper.

view full answer...

Answer 3

When installing the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200, the trailer sleeve set bolts should be torqued down to 125 foot pounds. I have attached the complete install manual below that you can also look through.

view full answer...

Answer 4

Yes, once you complete the install of the Draw Tite hitch part #36501 on your 2009 Ford Escape you will be able to reinstall the spare tire. I attached a picture that shows the spare reinstalled for you to check out as well.

view full answer...

Answer 5

According to my contact over at Lippert, when you attempt to clamp down the HappiJac Qwik-Load Turnbuckle #LC182897 if the spring has spring or is weak the buckles will turn a lot easier than one that is fully operational. If you've got one…

view full answer...

Answer 6

The HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles part #LC182894 is an excellent upgrade option for the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898. These are going to cut down dramatically on the time it takes to…

view full answer...

Answer 7

The Curt hitch part #C13082 that you referenced is a fit for your 1990 Chevy Silverado 1500 short bed that has a step bumper. You would also be able to keep your spare tire as well. At worst you might have to reposition it as you raise and lower the…

view full answer...

Answer 8

I have another option but the Curt Trailer Hitch Receiver #13942 will not fit on your 1992 Chevrolet CK 1500 if you do not have a roll pan. This is due to the fact that the roll pan hitches sit higher up and require a cut out in the roll pan for the…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver part #C13042 is what I recommend for a 1996 GMC Sierra C1500. This hitch features a bolt-on design with hidden crosstube. I checked with Curt and this hitch will work on models with a factory full-size spare tire so it…

view full answer...

Answer 10

The trailer hitch I recommend for a 1989 GMC K1500 Regular Cab is the Curt Trailer Hitch Receiver part #C13042. This trailer hitch has a class III rating and does not require any drilling for installation. It works on both step and fleet side…

view full answer...

Answer 11

You're not "required" to use a jack and jack stands when installing the Curt #C13269 but when performing the installation without an additional set of hands it's never a bad idea to have something that you can use to hold the hitch…

view full answer...

Answer 12

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…

view full answer...

Comparing Draw-Tite Trailer Hitches 75033 and 75099 for a 1990 Chevy C/K 1500

Featured Help Information

Miscellaneous Media

Continue Researching