Dimensions of Redline Rear Hanger with Bushing for Single Axle Trailer Suspensions # 30-20
Updated 11/26/2012 | Published 11/22/2012
Question:
what are the complete dimensions of this part: width, length, thickness?
asked by: Randall R
0
Expert Reply:
The dimensions of Redline Rear Hanger with Bushing for Single Axle Trailer Suspensions # 30-20 are 2-1/8 inches long, 1-3/4 inches wide, and 3/16 inches thick.
I have provided a video and a graphic that shows these dimensions as well.
I am also provided a page displaying the shackle links needed for use with this spring hanger and your 1-3/4 inch wide double-eye springs.
expert reply by:
Brandon M
0
click to enlarge
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Shop: Single Axle Trailer Fender w/ Backing Plate - Ribbed Steel - 14" to 15" Wheels - Qty 1
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 89" Long - 3,500 lbs
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Video: Ultimate Overview of the Rear Hanger for Double-Eye Springs
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Video: Nylon Bushing Review
- Video: Comprehensive Review: Single-Axle Trailer Hangers for Double-Eye Springs
- Search Results: shackle links trailer leaf spring suspension
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Q&A: Replacement Brake & Hub Assemblies for Dexter 8-147 Hubs
- Video: What to Know About the Shackle Bolt For Double-Eye Springs
- Q&A: Upgraded Equalizer and Shackle Kit for a 2010 Bullet Premier Trailer
- Video: Ultimate Overview of the Pull Pin, Easy Swivel Trailer Jack with 8" Wheel
- Video: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel: The Breakdown
- Search Results: shackle straps
- Q&A: Is There Advantage to 3 Leaf or 4 Leaf Trailer Suspension Leaf Spring
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How Does the Rear Hanger Get Welded to the Trailer Frame
- Search Results: trailer bump stop
- Search Results: spring hanger
- Search Results: bump stops
- Search Results: hangers trailer leaf spring suspension
- Q&A: Can Lock Nuts Be Reused on Trailer Suspension Bolts After Being Removed
- Search Results: trailer lights