Does Guardian Shield Mounting Bracket Fit Demco Kar Kaddy 3 Tow Dolly

Question

Question:

I have a guardian shield and I want to know if I can mount this on the tongue of the kar kaddy to use my guardian shid

asked by: Gary N

0

Expert Reply:

Your Demco Kar Kaddy X Tow Dolly # DM9713093 should allow you to mount your Roadmaster Guardian Rock Guard # RM-4000 with the Guardian Shield Mounting Bracket for Roadmaster Tow Dolly # RM-2000-8.

Both dollies have 3" x 3" trailer tongues, so it should fit and work fine, but since they have never been tested together I can't say with absolute certainty, but it seems highly likely there won't be an issue.

If you don't want to take that chance there is a specific guard for a Kar Kaddy dolly, the Sentry Deflector for Demco Kar Kaddy Tow Dollies # DM5950.

expert reply by: Kyle S

0

Answer 1

Hey Kevin, thanks for reaching out. I Looked up the online manual for the 2025 Cadillac XT4 and according to the manual Dinghy towing is a no, but dolly towing is approved and will not damage the drivetrain. The manual does not call out the AWD being…

view full answer...

Answer 2

Hey Eric. The Demco Kar Kaddy X Tow Dolly w/ Disc Brakes item #DM9713093 does not come with a title it comes with a manufacturers statement of origin (MSO) when you purchase it. You'll be able to take this to your DMV to register it to get a…

view full answer...

Answer 3

So when using a tow dolly for your 2015 Chrysler 200, the dolly will have the needed lights, so you won't need to install any type of lighting kit. The dolly will have the necessary brake lights and turn signals which will come from the…

view full answer...

Answer 4

Yes we do have the following replacement brake parts for your Roadmaster RM3477 Tow Dolly #RM-2050-1. Driver's-Side Brake Assembly #RM-4701-L Passenger's-Side Brake Assembly #RM-4701-R Replacement 10" Brake Drum #RM43FR Grease Seal…

view full answer...

Answer 5

The correct replacement hub/drum for the Roadmaster Tow Dolly with Electric Brakes (RM3477) part #RM-2050-1 is the Dexter Trailer Hub and Drum Assembly part #84546UC3-EZ. This is a complete kit and what I recommend using to get back up and running.…

view full answer...

Answer 6

Hey Scott, The installations differ slightly but are pretty much the same since both the etrailer #e86YR and Blue Ox #BO84FR replace the factory tow hooks. Of the two I prefer the etrailer baseplate because it sits in just slightly more for a more…

view full answer...

Answer 7

I spoke to my contact at Roadmaster and he informed me that as long as your tow dolly has a tongue with a diameter of 3-1/4 inches or less the RoadMaster Tow Dolly Mounting Bracket #RM-2000-8 would work for you. If you need the guard as well you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 10

Your Demco Kar Kaddy X Tow Dolly #DM9713093 should allow you to mount your Roadmaster Guardian Rock Guard #RM-4000 with the Guardian Shield Mounting Bracket for Roadmaster Tow Dolly #RM-2000-8. Both dollies have 3" x 3" trailer tongues, so…

view full answer...

Does Guardian Shield Mounting Bracket Fit Demco Kar Kaddy 3 Tow Dolly

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching