2-1/2 Inch Shank for Eaz-Lift Weight Distribution Hitch

Updated 09/24/2020 | Published 09/22/2020

Products Featured in This Question

Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop

(45)

$175.41

Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise

(80)

$208.69

Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop

(159)

$235.14

Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop

(54)

$216.27

Question:

We have a Eaz lift weight distribution system with a 2 inch shank. When we upgraded our truck, it has a 2 1/2 inch receiver so we have been using a reducer for the receiver but we still dont like the play it has. Can we just replace the shank with a 2 1/2 inch or do we also have to replace the weight distribution head so it fits a 2 1/2 inch shank

asked by: Dana G

Expert Reply:

You can go from a 2 inch shank to a 2-1/2 inch shank with your Eaz-Lift weight distribution system. Weight distribution shanks are essentially universal so you won't have any issues. You just need a shank that has the proper rise or drop you are require.

The options for 2-1/2 inch shanks are as follows, with the rise and drops listed the maximum for the shanks:

- Equal-i-zer Weight Dist Shank - 7" Rise, 3" Drop # EQ90-02-4700

- Equal-i-zer Weight Distribution Shank - 13" Rise, 9" Drop # EQ94FR

- Curt Weight Distribution Shank - 6" Rise - 2" Drop # C17131

- Curt Weight Distribution Shank - 12" Rise - 9-1/4" Drop # C17132