Replacement Trailer Brakes and Drums for a 5,200 lb Axle
Updated 09/07/2020 | Published 09/04/2020
Products Featured in This Question
Question:
I need electric brake and drum kit for a 3 inch axel 1 1/4 and 1 3/8 bearings brake flange has 5 bolt pattern I think it is a 4400 or 5200 axel not sure please help
asked by: Randal B
Expert Reply:
Your 3 inch axle is likely a 5,200 lbs axle based on the bearing sizes you referenced. The Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K or the Trailer Hub and Drum - 5,200-lb to 7,000 lb E-Z Lube Axles - 12" - 8 on 6-1/2 - Galvanized # AKHD-865-7-G-EZ-K depending on the bolt pattern needed.
If you will use electric brakes, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. If you will use hydraulic brakes, then I recommend the brake assembly # AKFBBRK-7 or # AKFBBRK-7-D.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brkh12
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop - Drum - 2-5/16" Ball - Bolt On - 20,000 lbs
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: 23744 master cylinder
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Replacement Orifice Connector for Dexter Actuators
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Replacement Wheel Cylinder for 10" and 12" Hydraulic Brakes - Uni-Servo - Right Hand
- Shop: etrailer Hydraulic Trailer Brakes - Free Backing - E-Coat - 12" - Left/Right - 5.2K to 7K
- Shop: Replacement Brake Adjustment Screw Kit for 10" and 12" Electric Trailer Brake Assemblies
- Q&A: Removing Trailer Bearing that is Stuck on Spindle After Removing Hub
- Q&A: Free Backing Hydraulic Trailer Brakes Not Allow Trailer To Back Up
- Q&A: Is It Worth It To Convert Surge Brakes On 1999 Jayco Eagle To Electric, Or Get New Surge Brakes?
- Q&A: Troubleshooting Brake Adjustment Wheel that Wont Adjust with Brake Spoon
- Search Results: bearings
- Search Results: 14125a
- Article: Trailer Wiring Diagrams
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Search Results: brake actuator
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Shop: Trailer Wiring
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: trailer brakes
- Shop: Brake Controller
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Q&A: Converting Trailer from Surge Brakes to Electric Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
