Are There Replacement Parts for the Solera 69" Standard Flat Awning Support Arm

Question

Question:

This appears to be the set of brackets for A Solera arm set. Just need to make sure all the parts are in that bundle shown. The two arms that got bent in a storm this week are the two main ones. The bracket on the RV and adjusting arm are ok. I cant find anywhere to buy just those components that got bent. It is 69 inchs. It is the non-powered side if it matters, left looking at the RV. White.

asked by: Lee H

0

Expert Reply:

The Solera 69" Standard Flat Awning Support Arm part # LC281152 is sold as a complete unit, it is not available broken down in separate components. It will work on both manual and power awnings. If you have any damage to your existing unit you will need to replace the entire arm assembly.

expert reply by: Conner L

0

click to enlarge

Answer 1

The correct gas strut for your powered or manual Solera awning will simply depend on which Solera awning arm assembly you have. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hey Roy, thank you for the pictures of the awning head covers you have as that makes knowing what you need as a replacement a lot easier. Based on seeing them the correct back cover would be the part #LC289567 but since you need the front cover as…

view full answer...

Answer 6

Hello Ryan. If you are referring to this piece - Drive Head Pin #LC93FR, then it is certainly made of steel, not plastic. This is a confirmed replacement drive pin for Replacement Drive Head for Solera Power RV Awnings - Regal Style - Black #LC53TF.…

view full answer...

Answer 7

Hey Don, the Furrion Chill Cube part #FR69TD that you referenced has a two year warranty. This will cover it from any manufacturing defects. Have you had an AC unit go out?

view full answer...

Answer 8

Hey Karl! This won't be too difficult to do. Basically you're going to bypass that whole system by disconnecting the control module and then you can install the DeeMaxx Disc Brake Kit #DE66AR. You will disconnect the OEM power harness and…

view full answer...

Answer 9

The Solera 18V Power RV Awning Conversion Kit in White #LC434730 will be what you need to convert your Dometic A&E manual awning to an electric power awning. These arms are powered through a rechargeable battery that will operate the awning 22-25…

view full answer...

Answer 10

The Replacement Support Arm Assembly for Lippert 63" Short Awning part #LC97UD does not come with the motor or any wiring, you'll need to transfer the motor and wiring from your old arms. These arms can indeed be used on both the drive and…

view full answer...

Answer 11

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part #LC22ED or for a replacement idler arm part #LC62ED.

view full answer...

Are There Replacement Parts for the Solera 69" Standard Flat Awning Support Arm

Product Page this Question was Asked From

Continue Researching