Troubleshooting LCI Hydraulic Leveler

Updated 09/01/2020 | Published 08/28/2020

Question:

2016 Georgetown 360DS Controller #12478A levelers operate fine, after retracting all jack the jacks down led goes on after about 8 seconds. All jacks are retracted. right LED is flashing, is this an error code?

asked by: John R

Helpful Expert Reply:

The issue you described is not an error code. It does however show that your system is not calibrated properly, so I recommend connecting your trailer to your vehicle and moving the trailer to a level location. Then remove the battery connections for at least 5 minutes, test the battery to make sure you have 12 volts minimum which is required for this system to function properly. Next reconnect or replace the battery if needed, and then redo the zero point calibration.

If you still have issues, that the owners manual can't help you solve, let us know and we can continue to troubleshoot.

expert reply by: Jason S