2013 Toyota Venza Recommended Ball Mount for Towing a Camper

Updated 08/23/2020 | Published 08/21/2020

Products Featured in This Question

Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs

(1367)

$94.02

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(156)

$64.97

2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs

(3914)

$21.52

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3660)

$23.55

Question:

I have a 2013 toyota venza 2.7 4cyl, with a class III hitch installed, and I will towing a 13ft scamp trailer. Manufacturer said trailer coupler height is 18 inches from the ground, and my hitch receiver is only 13 1/4 inches from ground, what would you suggest for the ball mount adaptor that will give my hitch a rise closer to 18 or exactly 18? Camper weighs approximately 1900 lbs with all the things included, VEnza towing capacity is 2500 and max tongue weight of hitch is 350 lbs. thanks hope to hear from you

asked by: Victor E

Expert Reply:

I am happy to help you find the right hitch for your specific towing needs. I recommend the # AMSC6 Cushioned Ball Mount. This fits a 2 inch hitch receiver and will give you the 4.75 inch rise you need to meet your 18 inch coupler.

In the rise position, this hitch has 4 inches of clearance between the back of the mount and the hitch pin hole so you will want to make sure that (will) fit your installed hitch receiver. I (have) attached a video for you to reference and see these dimensions. This particular mount is also helpful because it is cushioned to help prevent wear and tear on your Toyota and the camper when towing.

Be sure to get the # 40038 ball if you do not already have a 2 inch ball, and I suggest the # 118482 if you still need a wiring harness. I also recommend the # e98880 locking hitch pin to help prevent theft of your camper or any other trailers you may be towing.

expert reply by: John W