What Needs to be Removed to Install the Roadmaster Base Plate Kit for a 1994 Jeep Grand Cherokee

Question

Question:

what do i need to remove and in what order

asked by: Alan

0

Expert Reply:

I am going to send you a copy of the installation instructions for the Roadmaster Base Plate Kit # 1411-1 also, but it looks like you will need to remove the tow hooks (if equipped), the two bolts securing the radiator cross members, the plastic splash guard retainer located behind the rear cross member bolt and the bolts for the tubular cowl support from the cross member.

expert reply by: Jameson C

0

Answer 1

Hello Mark, Based on what you described with the driveway angle and the additional weight you plan to carry on the hitch, I would recommend going with the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54. The main difference between the…

view full answer...

Answer 2

Based on the chassis and your weight of your 2012 Ford E-350 cutaway chassis the SumoSprings you'd want the part #SSR-106-47-1 which has a 4,600 lb capacity. The part numbers you mentioned are for a truck chassis.

view full answer...

Answer 3

I checked with SumoSprings and they told me without the spacer the #SSR-130-54 is 5 inches tall and with the spacer is 6 inches tall.

view full answer...

Answer 4

For your 2023 Ford E-350 cutaway, I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88138. I like this option because you get the best of both worlds. You get the adjustable load support of air springs and the comfort and…

view full answer...

Answer 5

The SumoSprings Maxim Custom Helper Springs like part #SSR-106-40-1 are what I recommend for a 2020 Coachmen Leprechaun. The SumoSprings Solo Custom Helper Springs like part #SSR-130-54 are a good option as well but they don't engage constantly…

view full answer...

Answer 6

I did some research and it looks like your 2016 Forest River Sunseeker 2500TS has a Dry Weight of 11,500 pounds and a fully loaded GVWR of 14,500 pounds. With that said, I recommend the following SumoSprings: SumoSprings Solo Custom Helper Springs -…

view full answer...

Answer 7

Hey Charlie! The best suspension upgrade we have for your 2023 Ford E-350 Cutaway Dually is going to be the Firestone Ride-Rite Air Helper Springs item #F2061. These are specifically designed to fit only the dually models. They have a 5,000 lbs…

view full answer...

Answer 8

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 9

Hi Kenneth; it looks like your 2017 Thor Axis 25.3 is built on the E-Series chassis. However, I can't determine if it is the E-350 or 450 since different sources list both. The Thor brochure only says it is an E-series so you will need to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

What Needs to be Removed to Install the Roadmaster Base Plate Kit for a 1994 Jeep Grand Cherokee

Continue Researching