Install Video of Blue Ox Base Plate Kit BX1690 On 2011 - 2016 Cadillac SRX

Question

Question:

Any major differences in installation on the 2015 to the video on the 2016?

asked by: Dwayne G

1

Helpful Expert Reply:

The Blue Ox Base Plate Kit part # BX1690 is a fit for a 2010-2016 Cadillac SRX, therefore the installation of this product will be more or less the same on any vehicle within this year range so you can use the video below on a 2016 model to assist. If you don't already have a tow bar picked out, the Blue Ox Alpha 2 Tow Bar part # BX7380 is what I recommend.

expert reply by: Conner L

1

Answer 1

Per the dinghy towing instructions in the owner's manual for your 2010 SRX, three fuses need to removed and then re-installed in a later step. The fuses are BCM 1, BCM 2, and BCM 3. This information can be found starting on page 9-106. There are…

view full answer...

Answer 2

I believe the issue you referring to is not traditional cruise control but the feature on many later model vehicles of adaptive cruise control, which I don't believe the 2014 Cadillac SRX models were equipped with. However, please verify this…

view full answer...

Answer 3

On your 2013 Cadillac SRX Luxury AWD I recommend the Blue Ox Base Plate Kit - Removable Arms #BX1690. I don't have reservations about the Blue Ox Towbars. I recommend using the Blue Ox Avail Tow Bar - Motorhome Mount - 10,000 lbs #BX7420 which…

view full answer...

Answer 4

To wire the sockets of the Roadmaster Taillight Kit part #RM-155 to the wiring harness you will just need to follow the diagram I attached that details where each wire goes. I also attached installation instructions and an install video for you to…

view full answer...

Answer 5

The Second Vehicle Breakaway Kit for Blue Ox Patriot Supplemental Braking Systems #BRK2505 is designed to work with the Blue Ox Patriot BRK2012 (NLA), Patriot II BRK2010 (NLA), BRK2016 (NLA), or the Patriot 3 BRK2019 (NLA). Unfortunately, this will…

view full answer...

Answer 6

The complete replacement breakaway kit for a Hopkins Brake Buddy II is the part #HM39340 but since you only want the switch Fred and it's a universal switch that is used you could use the part #C52010 and be fine.

view full answer...

Answer 7

Yes, the Replacement Brake Buddy Vantage Select Break-Away System #HM39327 will fit your Brake Buddy Vantage Model 39504.

view full answer...

Answer 8

It sounds like you are wanting to flat tow your 2013 Cadillac SRX behind your RV. For a supplemental braking system, I really like the SMI Stay-IN-Play DUO #SM99251. This proportional system will activate as soon as your RV's brake lights go on…

view full answer...

Answer 9

Since you're using a Blue Ox Alpha tow bar #BX7380 you will want to stick with the Blue Ox baseplate #BX1690. The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 would be a compatible fit with your SRX and motorhome, but I want to…

view full answer...

Answer 10

Yes, the Blue Ox base plate kit part #BX1690 that you referenced does fit the 2015 Cadillac SRX with adaptive cruise control.

view full answer...

Answer 11

If by pressure switch you mean just the break away switch for your Roadmaster BakeMaster 9000 then you can use part #RM-650898. For a complete BrakeAway Kit including the switch and air cylinder use part #RM-8600. If you refer to the Pressure Reducer…

view full answer...

Answer 12

To attach the Blue Ox 6-Pole Connector #BX294-0902 to the now discontinued Blue Ox BX1721 Base Plate on your 2021 Chevy Colorado you will need to use #12-14 x 1" self drilling screws which you can pick up from a local home improvement store. I…

view full answer...

Install Video of Blue Ox Base Plate Kit BX1690 On 2011 - 2016 Cadillac SRX

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching