Will the etrailer Trailer Hitch Fit a 2014 Jeep Grand Cherokee Limited Without Cutting Rear Bumper

Question

Question:

Will this fit a 2014 Jeep Grand Cherokee limited without needing to mess with the bumper?

asked by: Hannah N

0

Expert Reply:

The etrailer Trailer Hitch Receiver part # e98901 is a custom bolt-on fit for a 2014 Jeep Grand Cherokee Limited and it will not require any cutting or drilling into the rear bumper for installation.

expert reply by: Conner L

0

Answer 1

Yes, the etrailer Trailer Hitch Receiver #e98901 will fit your 2014 Jeep Grand Cherokee Summit. This receiver will fit all models of the 2014 Grand Cherokee except the SRT-8 trims. The Tekonsha T-One Vehicle Wiring Harness #118727 will give you a…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

Your 2014 Jeep Grand Cherokee may have the connector needed but it's not active. First, I would use a circuit tester such as #PTW2992 to test the connector to see if it's active. Since your Jeep did not come with a factory 7-Way you may need…

view full answer...

Answer 4

Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt #C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th…

view full answer...

Answer 5

Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…

view full answer...

Answer 6

For your 2020 Jeep Grand Cherokee I recommend the Tekonsha T-One Vehicle Wiring Harness part #118727. It's custom made for your Jeep and it gives you a 4 way flat trailer connector so you have all the lights to tow a trailer safely and legally.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Nathan, welcome back! The etrailer Invisible Base Plate Kit item #e98950 is exactly what you need for your 2021 Jeep Grand Cherokee so long as yours isn't a SRT-8 or one of the Trackhawk models. For a compatible tow bar, I recommend the…

view full answer...

Answer 9

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Answer 10

There is actually no hardware that comes with or is needed to purchase separately for the etrailer Trailer Hitch Receiver #e98901 or its counterpart, the Curt Trailer Hitch Receiver #C13182, both of which fit your 2019 Jeep Grand Cherokee (the only…

view full answer...

Will the etrailer Trailer Hitch Fit a 2014 Jeep Grand Cherokee Limited Without Cutting Rear Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching