Galvanized Trailer Idler Hub With Bearings L44649, 2,200 lb Axles and 13 Inch to 15 Inch Wheels
Updated 07/15/2020 | Published 07/13/2020
Products Featured in This Question
Question:
Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13inch - 15inch Wheels - Galvanized - 8-258-50UC1-EZ I think this is the hubs I need. I have a Tracker Trailstar boat trailer, inner and outer bearings are L44649 seal diameter is 1.5. Do these hubs come with the races already pressed in?
asked by: Philip D
Expert Reply:
The Trailer Idler Hub Assembly - Galvanized # 8-258-50UC1-EZ is correct if you have inner and outer bearings # L44649, the grease seal has a 1.50" inner diameter, and you have 13" to 15" wheels with a 5 on 4-1/2" bolt pattern.
This is for E-Z lube axles so if you have standard axles you can use the Trailer Idler Hub Assembly - Galvanized # 8-258-50UC1 which is the same part except its grease cap does not have a plug like # RG04-040 for access to the E-Z Lube grease zerk.
The hub assemblies do not come with the races pressed in so you will need to assemble the hub. For grease I recommend the LubriMatic Marine Trailer Wheel Bearing Grease # L54FR and a compatible grease gun like the # 30-800; for a bearing packer I recommend the Bearing Packer # PTW1218 or # ALL647646.
I have added links to video reviews for you to check out as well of both hubs, the E-Z Lube # 8-258-50UC1-EZ and standard # 8-258-50UC1.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Looking For ID 1.250" / OD 1.979" Double Lip Grease Seals For Jet Ski Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Q&A: Is Furrion Vision S+ Direct Replacement for Vision S
- Article: Electric Trailer Brakes: How They Work & What to Buy