What Wheel Studs Does 5,200 lb Trailer Hub Use

Question

Question:

What size wheel studs fit a 5200 lb Axel 12 inch hub 2 inch brakes

asked by: James L

1

Helpful Expert Reply:

Our 5,200 lb trailer hubs with 1/2 inch diameter wheel studs like the part # 8-201-5UC3-EZ use wheel studs like the part # 7-262.

expert reply by: Jameson C

1

Answer 1

Hello Jeffrey, thanks for reaching out. The link below will show you the MORryde wet bolt upgrade kit #MR46ZR instruction manual. The torque spec for the wet bolts is 50 ft-lbs. Let me know if you need anything else.…

view full answer...

Answer 2

Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The U-bolts of the U-Bolt Kit part #APUBR-9 are Grade 5. The torque specs for 9/16 diameter U-bolts like this is 65-95 ft lbs.

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

Hi Greg; I wish there was a way for me to know the correct parts for that 2023 Coachmen Catalina but we don't have a way to look it up. The only company that lists their parts like that is Grand Design. If they can get out to their trailer and…

view full answer...

Answer 10

Hi Travis; those look pretty flat so I don't think 26" would do it either. The 25-1/4" long #EM86RB you ordered will be a better fit. Completely flat these would have a similar measurement at just over 26" which is in line with…

view full answer...

Answer 11

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 12

What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…

view full answer...

What Wheel Studs Does 5,200 lb Trailer Hub Use

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching