What Ball Mount Has Most Rise

Question

Question:

Whats the best option to get a 12 inch rise in my hitch? I have an eight inch rise hitch. Is there a 4 inch rise extended I can pair it with?

asked by: Nick

0

Expert Reply:

The ball mount we offer that has the most rise is the part # AMSC12 which has a 10-3/4 inch rise. For a high low adapter (if that's what you were looking for) the option with the most is the part # RM-048-10 which has a 10-1/4 inch rise.

expert reply by: Jameson C

0

Answer 1

The Convert-A-Ball #AMSC12 cushioned ball mount can indeed be used in the rise position, which would provide 10-3/4 inches of rise. Keep in mind this is an extreme rise. Usually, needing a rise that large would be a good indication that you really…

view full answer...

Answer 2

When we installed the Draw Tite hitch part #75270 on a 2012 Honda Odyssey we found it measured 11-1/2 inches from the ground to the top of the hitch opening. That would mean you need a rise ball mount like the #AMSC12 which has a rise of 10-3/4…

view full answer...

Answer 3

I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 11

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

view full answer...

Answer 12

Hello Thad, Thanks for getting that drawing to me. I went ahead and pulled the Patriot Hitches 2" Adjustable Drop Hitch Adapter - 11" Rise/Drop - 7K - Gloss - Silver Accent #PH38PR from the warehouse so I could compare it to your drawing.…

view full answer...

What Ball Mount Has Most Rise

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching