Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If your trailer rides nose-high or too low, the tow feels off from the start. This mount gives you a full 10" drop from the top of your hitch receiver tube, helping align your trailer for level, stable towing. With the right height match, your load tracks straighter and brakes smoother on every trip.
When you’re hauling serious weight, you want a mount that’s built to handle it. This one’s rated up to 7,500 lbs gross towing weight and 750 lbs tongue weight, making it a solid choice for many heavy-duty setups. The Class III 2" x 2" steel shank takes on the strain without flexing or fussing.
You can feel how solid it is when you pick it up. The welded gusset adds strength between the shank and ball platform, keeping things steady under load. From center of hitch pin hole to center of ball hole measures 10-1/2", and there’s 3-3/4" clearance from the pin hole to the gusset—enough room for a clean fit in most setups.
This is a fixed ball mount that just works. It fits any standard 2" hitch receiver and takes a ball with a 1" shank diameter. Slide it in, secure your pin and clip, torque down your ball, and you’re ready to tow. No moving parts, no need to flip or adjust—just a strong, steady connection every time.
Road grime and weather can beat up towing gear fast. The gloss black finish on this steel shank helps protect against rust and wear so it keeps looking sharp and working strong through seasons of use. It’s built for everyday towing without needing special upkeep to stay dependable.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Brophy ball mount for two inch hitches. Has the 10 inch drop and a 7,500 pound gross towing weight capacity. Now, this is a nice, sturdy steel ball mount for two inch hitches, and it can be used in the drop position to fit your application. Total drop on this, which is measured from the ball platform to the top of the shank, you can see if we put a ruler on it, it's gonna be right at 10 inch drop.
Now, this ball mount will let you hook up your trailer to your tow vehicle. And because this has such a large drop of 10 inches, it is designed for lifted trucks. This shank right here will slide into your vehicle's two inch hitch receiver. And the ball platform right up front here provides the mounting point for your hitch ball. Now, the hitch ball is not included.
That is sold separately. The ball hole diameter that the ball fits in is one inch. So, it is designed to work with hitch balls that have a one inch shank diameter, and the thickness of the ball platform is 3/4 of an inch. Now, this ball mount cannot be used in the rise position, and it cannot be use with hitch extenders. Also, one other note I do wanna mention, use of any ball mount like this that has a 10 inch drop does reduce the trailer hitch capacity by 1/3.
So, your towing capacity is limited to 2/3 of your lowest rated towing component, be it the vehicle, the hitch, the ball mount, or your hitch ball. This is a nice, sturdy steel construction. You can see it has the hollow shank. It is a corrosion resistant black powder coat finish. And when you do install this into your hitch receiver, it will require a hitch pin and clip or a hitch lock to secure it.
Now, that is not included. We do sell those separately on our website, and they're usually listed on this product page as a related product. The pin hole diameter is 5/8 of an inch, so you do wanna make sure to use a pin and clip or hitch lock that is a 5/8 inch diameter pin. Now, the length, the length in a ball mount is always measured from the center of the hitch pin hole to the center of the hitch ball hole. So, on this one, if we go from the center to the center of the ball hole, that is right at 11 1/8 inches. And then the distance from the center of this hitch pin hole to the nearest part of the gusset, you can see they put this gusset in there for extra support, so just to make sure you don't run into any fitment problems, the center to that, to the start of the gusset is about 3 3/4 inches. Now, this part is made in the USA. Again, the specs on this, it's designed to fit two inch by two inch trailer hitch receivers. Gross towing weight capacity is 7,500 pounds, and the tongue weight capacity is 750 pounds. But that should do it for the review on the Brophy ball mount for two inch hitches with the 10 inch drop and a 7,500 pound gross towing weight capacity..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Norm
5/26/2016
Working out great!