Recommended B&W Gooseneck Trailer Hitch Compatible with 2015 Ram 2500

Question

Question:

I have a 2015 ram 2500 with air ride rear bags which bandw hitch is right for my truck?

asked by: Dale S

0

Expert Reply:

THe B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1384 is the correct hitch for your 2015 Ram 2500. This is compatible with the factory air ride or the aftermarket air springs like # F2598.

expert reply by: Jason S

0

Answer 1

The gooseneck trailer hitch I recommend for your 2018 Ram 2500 with the 6-1/2' and RamBox is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1384. The reason I recommend this gooseneck hitch is because unlike the other…

view full answer...

Answer 2

Thanks for the information! I just spoke with my rep at Lippert and your 2023 Alliance 24RK 5th Wheel Trailer has a Rhino-Box. To replace it you will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR. The Gen-Y gooseneck pin boxes do…

view full answer...

Answer 3

Thanks for the pictures and congrats on the new trailer! You are correct the Gen-Y item #GY98GR would be the correct adapter for your Jayco Eagle. This system replaces the Lippert Rhino pin box and has the extra pin weight capacity you will need. I…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Recommended B&W Gooseneck Trailer Hitch Compatible with 2015 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching