Replacement Leaf Springs for 7000-lbs Axle

Updated 06/26/2020 | Published 06/25/2020

Question:

I’m replacing the 7000# leaf springs on my Dual axel camper. The springs that you supply are 3/8” shorter than the junk Dexter put on. Will I be ok?

asked by: Troy

Helpful Expert Reply:

In most cases after use, leaf springs are going to flatten out, so when people go to measure them they're often slightly off from the measurements of the new ones; you'll want to make sure that the measurements are close, but matching the capacity is more important.

For your 7000-lbs axle you'll want to use the # e64SR, which are 24-7/8" long. These springs are 1-3/4" wide and as long as your old springs are within about 1/2" of those, you'll be just fine.

If your measurement is significantly different from that, please let me know and I can help you find the correct springs.

expert reply by: Erik B