Dimensions for the MORryde ALLTREK 4000 Suspension Kit

Updated 04/28/2025 | Published 04/14/2024

Question:

How are the measurements taken for the moreryde 4000?

asked by: Doug

Expert Reply:

Hey Doug, thanks for reaching out!

The MORryde ALLTREK 4000 # MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

expert reply by: Jon G

Dimensions for MORryde ALLTREK 4000
(click to enlarge)

Doug

4/15/2024

It is asking for another dimension. It was asking for a wheelbase dimension. Is that center of hub to center of hub or? Center of hub to center of moreryde pivot point?

Jon G.

4/15/2024

@Doug Ah, yes. The 33" wheelbase mentioned is measured from center hub to center hub.

Dan

4/24/2025

Hello Jon- I am looking to upgrade my Suspension. I like the Morryde All Treck 4000. My dilemma is I have a 35” wheel base, but the size of the Morryde equalizer for the 33” wheel base is much closure to the one I currently have the Dexter 13-10 equalizer. Second question is my 5th wheel has shocks can I keep my shocks on or do I need to remove them Thank you in advance Dan

Jon G.

4/28/2025

@Dan Great question! If the 33" wheelbase kit seems to match up better with your current equalizers, then it's okay to go with that kit instead. You can keep the shocks on your suspension! There's also a qualification guide I'm attaching here so you can make sure it will work with your RV setup.

Helpful Links

https://www.morryde.com/wp-content/uploads/2023/01/alltrek-4000_qualifier_v4.pdf