Dimensions of Curt Trailer Hitch C13133

Question

Question:

Hello eTrailer, Regarding item ## C13133, will you tell me: 1 The distance between the front and back bolt holes and 2 The height between the mounting plate and the top lip of the hitch receiver? Thanks!

asked by: Steve M

0

Expert Reply:

Attached are some photos of these dimensions for the Curt Trailer Hitch Receiver # C13133 that you referenced.

Here is a list of the vehicles that this hitch fits:

2009 - 2017 Volkswagen Tiguan
2017 - 2018 Volkswagen Tiguan Limited

expert reply by: Jon G

0

click to enlarge

Answer 1

Class I trailer hitch receivers like #24847 have a distance of about 1-5/8 inches from the center of the hitch pin hole to the welded stop in the back of the hitch receiver tube. Class I ball mounts like #3594 normally are about 1-9/16 inches from…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hey Paul. You can indeed install the Curt Hitch item #C99RJ on your 2025 VW Tiguan without trimming. The only issue with not trimming the lower fascia when installing the Curt item #C99RJ is that square tube connecting the receiver touches the trim.…

view full answer...

Answer 7

Hello Don, Great question, being able to get into the hatch of your Prius would be important to me as well. You will want to go with the Swagman XTC2 TILT #S64671 because it solves the exact concern you mentioned about getting stuck at the trailhead…

view full answer...

Answer 8

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Answer 9

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 12

The towing capacity restrictions of the Curt ball mount part #D210 are pretty odd but basically if you were to use it with a bike rack like the XTC #S64670 you mentioned the capacity would not be reduced. I really like the Lippert Jack-It part…

view full answer...

Dimensions of Curt Trailer Hitch C13133

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching