Replacement Bearings for 7K Axle on 2017 Dutchmen Voltage 5W Toy Hauler

Question

Question:

I was able to find the V number on the axle-does this help?

asked by: Jason S

0

Expert Reply:

In most cases, it's going to be more cost effective to replace all of the components than it is to simply swap out the axle. You could go with a complete axle like the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB if your current axle is 94" from hub face to hub face. In reality, it's probably going to be most cost effective to replace your hubs, drums and brakes though.

If you can confirm the bolt pattern on your current wheels, and let me know the bearings that are in your current hubs, I can help you locate the correct hubs and brakes for your 2017 Dutchman Voltage Toy Hauler.

expert reply by: Erik B

0

Jason

6/18/2020

I was able to find the V number on the axle-does this help?

Erik B.

6/18/2020

I was able to find out the parts you need based off of the V number. It looks like you've got inner bearing 25580 and outer bearing 14125A on your current hubs. To replace the hubs and drums I recommend that you use the Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # AKHD-865-7-2-K, which come pre-greased and ready for installation. These hubs use the same 25580 inner and 14125A outer bearings that you've currently got and are the correct fit for your spindles. For the brakes, I recommend using self adjusting brakes like the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. You will need brake mounting hardware with this kit, which can be obtained with part # BRKH12. I've linked some review and installation videos of these for you to have a look at, as well.

Answer 1

For the newer GM trucks like your 2024 Chevy Silverado 2500 you do need to use the Furrion GM adapter part #FR87PR with the Furrion Observation Vision S systems like the part #FOS43TASF that you referenced. This is the adapter that the video you…

view full answer...

Answer 2

If you're installing the Furrion Vision S Wireless RV Backup Camera System #FOS43TASF without prewiring then you have two options for installation. Option 1: You can simply splice into the wiring running to your trailer's reverse lights if…

view full answer...

Answer 3

Your Dexter 5k axle uses 12" x 2" brakes, so the correct electric brakes are the following: - Electric Trailer Brake Kit - Self-Adjusting #AKEBRK-7-SA The other thing you will need is the mounting hardware, part #BRKH12.

view full answer...

Answer 4

The Replacement Furrion Monitor Power Cable #C-FOS07TAPK-006 powers the monitor. I believe you are looking for the 7-Way Vehicle Power Adapter #FR87PR that eliminates the PWM issue that causes the Furrion Vision S #FOS05TASF cameras not to get the…

view full answer...

Answer 5

The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…

view full answer...

Answer 6

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

view full answer...

Answer 7

I need a little more info from you. Basically we know you have a 5,200 to 7,000 lb rated axle but the additional info we need is the bolt pattern that the wheels you have use as well as the diameter of the spindle where the seal rides. With that info…

view full answer...

Answer 8

Thanks for the picture. For your 7,000 lb Lippert axle, I recommend the Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs, #AKEBRK-7R-SA, and for the left side the matching #AKEBRK-7L-SA. These brakes…

view full answer...

Answer 9

You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would…

view full answer...

Answer 10

That's a good question, but the measurement from hub face to hub face is taking into account the slight bend that is on all trailer axles (the axles straighten out when a load is placed on them). The axles we carry with a 94 inch measurement from…

view full answer...

Answer 11

Hello George. We will undoubtedly have a bearing kit for the 7K Lippert your 2017 Jayco North Point 5th wheel. That said, I do not have a way to tell you the exact seal size based on the info you provided. The best way to find this out will be to…

view full answer...

Answer 12

If your axle is not damaged I recommend just replacing the brakes and hubs. The Dexter Trailer Hub and Drum Assembly #8-219-18UC3 will include the new bearings, lug nuts, dust cap, and grease seal. The races have already been pressed into the hub for…

view full answer...

Replacement Bearings for 7K Axle on 2017 Dutchmen Voltage 5W Toy Hauler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching