Replacement Bolt, Clip, and Washer for Yakima HoldUp Bike Rack

Question

Question:

Hi there, I recently bought a Yakima hitch bike rack and the seller didnt include a hitch washer or clip. What set do you recommend I buy for this bike rack to replace the washer, clip, and bolt? I attached two pictures so you can see what model it is hopefully. Thanks!

asked by: Carson

0

Expert Reply:

Thanks for the photos! Those definitely helped in identifying what bike rack you have.

Looks like you have the Yakima HoldUp so if you have the rack with the 1-1/4" shank # Y02445 then the set you need is part # Y8890176, but if you have the rack with the 2" shank # Y02443 then you need the set # Y8890200 instead.

If you aren't sure which one you have just measure the inside diameter of your trailer hitch receiver and then choose according to what you find!

expert reply by: Jon G

0

click to enlarge

Answer 1

Easiest way will be based on what bike rack you have. Could you get me that info and I can check to see which pin you'd need for a replacement.

view full answer...

Answer 2

I have an option for you, but no, the #8880519 will not work on the shank of your Yakima bike rack that you sent me a picture of. The only option for you is a reducer that installs in your 2" trailer hitch receiver like the #HT02, and then will…

view full answer...

Answer 3

For your Yakima HoldUp 2 Bike Rack for 1-1/4" Hitches - Platform Style - Tilting #Y02445, the Replacement 2" Hitch Adapter for Yakima Carriers #Y8890174 will not work according to my contact at Yakima and it is no longer available. Instead…

view full answer...

Answer 4

I checked with Yakima and for your older model Yakima Holdup for a 1-1/4 inch hitch the correct hitch pin is the part #Y8880129.

view full answer...

Answer 5

Since the lock number of your hitch lock is only listed on the side of the lock core, and yours is locked and therefore not accessible, the only solution is to replace what you have with a new hitch bolt and lock. For that you'd need part…

view full answer...

Answer 6

We do carry replacement end caps for the Yakima HoldUp Bike Carrier. For an original HoldUp carrier you can order part #8880222. The other end cap we offer, part #8880228, will fit all HoldUp bike carriers and is designed for use with the bike…

view full answer...

Answer 7

The Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks #SA3032 is not the best option for you. There is not a shank adjustment sleeve like that for your Yakima Holdup. You would either want the 2 inch shank #8880580 or…

view full answer...

Answer 8

To fix your damaged HoldUp (models Y02433, Y02435, Y02434, Y02433-02435), you will need to replace the entire piece with the rear wheel holder assembly #Y90198 you were looking at. I checked with Yakima and they informed me that they do not sell…

view full answer...

Answer 9

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be reused.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Bolt, Clip, and Washer for Yakima HoldUp Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching